Torchmate Plate marker

Torchmate Hardware discussion forum
Post Reply
Bradley
2 Star Member
2 Star Member
Posts: 88
Joined: Mon Jul 14, 2014 9:37 pm

Torchmate Plate marker

Post by Bradley »

I am curious if its worth buying the torchmate plate marker or is it better to go a different route? I have a torchmate 5x10, I am also very close to the factory here in reno. I am not sure how the aftermarket products interface other than all your doing is commanding a tool to come on and perform its task that the software has instructed it to do.
ajk2004
1.5 Star Member
1.5 Star Member
Posts: 42
Joined: Sun Jan 24, 2016 2:22 pm

Re: Torchmate Plate marker

Post by ajk2004 »

Do yourself a favor and build it yourself. Their plate marker is pretty expensive. It would be a turnkey option. You could build one yourself with a nice chicago pneumatic engraving pen (which is what they use) for around 4-500 bucks I would say. If you have a lot of time, you could do it fast. If you don't have time and a lot of money, I would say to buy it.
Bradley
2 Star Member
2 Star Member
Posts: 88
Joined: Mon Jul 14, 2014 9:37 pm

Re: Torchmate Plate marker

Post by Bradley »

Okay Thanks.
Post Reply

Return to “Torchmate Forum”