Torchmate Help, where to by parts?

Torchmate Hardware discussion forum
Post Reply
timberfab
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 92
Joined: Wed Aug 19, 2009 8:30 pm

Torchmate Help, where to by parts?

Post by timberfab »

I have an older Torchmate system that i like a lot.. but over the last few months it has been very frustrating. after about 3 months of down time i finally got it running this morning. while making my first cut the Auto Torch Height Control on the gantry broke its spring coupler.

my question is this, does anyone have a source for these things? is there an upgrade? i know i can call torchmate and order it but i was wondering if there was anywhere else.
cypher
2 Star Member
2 Star Member
Posts: 59
Joined: Tue Aug 25, 2009 11:30 am

Re: torchmate help

Post by cypher »

timberfab
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 92
Joined: Wed Aug 19, 2009 8:30 pm

Re: torchmate help

Post by timberfab »

i knew there was a better was. thank you very much.

was searching on the McMasterCarr site and ran out of things to call that part. thank you very much
stompjrkz400
1 Star Member
1 Star Member
Posts: 19
Joined: Fri Feb 12, 2016 7:08 am

Re: Torchmate Help, where to by parts?

Post by stompjrkz400 »

did u ever get this figured out, i broken mine on my first cut too, im running eletrical tap on mine at the moment. TM wants 100$ for the coupler. i have no idea which one to get on McMaster
Post Reply

Return to “Torchmate Forum”