It is currently Wed Dec 13, 2017 5:34 pm

 

Plasma converting to router

Torchmate Hardware discussion forum
Tipp_BB
Posts: 6
Joined: Tue Sep 22, 2015 10:08 am

Plasma converting to router

Postby Tipp_BB » Thu Oct 19, 2017 9:32 am

When I bought my table I purchased the wood router option. I have not been successfully in figuring out a way to secure the wood to the water table. Does anyone out there have or know of a way to secure the wood to the water table. Do I need to put down some sort base with a clamping system to hold the wood down secure. If so do you or can you share how you are successfully in doing this.

Thanks

tylerd
Posts: 31
Joined: Fri Jan 20, 2017 3:25 am

Re: Plasma converting to router

Postby tylerd » Thu Oct 19, 2017 11:20 am

Curious, what table did you buy? Can they provide some support?

tcaudle
Posts: 812
Joined: Tue Feb 28, 2012 6:47 pm

Re: Plasma converting to router

Postby tcaudle » Fri Oct 20, 2017 12:38 pm

You need to design a flat cutting surface with spoil board that covers your water table and have some way to level it if you want to do any cutting that needs controlled depth. You will need to keep the water tray covered unless you want routing debris floating in your tray. Years ago I built a combo router/plasma table and designed slide in trays for water (with drains) and an adjustable frame with MDF spoil board. It took about 45 minutes to change over from one to the other. While its neat for a hobbyist, proto shop or casual user to be able to do routing or plasma its not a great idea for a production shop unless floor space is missing. Separate tables have distinct advantages. Plasma assumes the material is not flat and all cuts are through and through. The THC will adjust for material not flat A router cuts dwon into the media and the depth is based on the material being flat and level. Being off a 1/4" out of level on a plams is not big deal (unless you have no THC) but it is on a router.

Router media needs to be secured to the spoil board and the spoil board needs to not move.

tylerd
Posts: 31
Joined: Fri Jan 20, 2017 3:25 am

Re: Plasma converting to router

Postby tylerd » Sat Oct 28, 2017 4:21 am

Yeah 2 tables or downdraft I would think would be the way to go


Return to “Torchmate”

Who is online

Users browsing this forum: No registered users and 1 guest