Switching to slats

PlasmaCam Hardware discussion forum
Post Reply
Twisted 1
2 Star Member
2 Star Member
Posts: 50
Joined: Thu Jan 28, 2010 9:47 am
Location: Ontario Canada

Switching to slats

Post by Twisted 1 »

Was wondering if anyone has pictures of their setup with slats instead of the grates. I have the old dhc and would love to change to slats. Thanks
Pete
Twisted Image Customs and Fabrication
Ontario Canada
marcnaz
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Sun Oct 12, 2008 10:32 am

Re: Switching to slats

Post by marcnaz »

I fabricated a water tray that I can drain and remove slats and/or tray itself. Works very well. Welded angle iron and square tubing assembly for the slat mount just sets in the tray and is also easily removable for cleaning.
Water Table w Slats.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Post Reply

Return to “PlasmaCam, Samson, & Go Torch Forum”