Lost CPC upgrade instructions! Anyone have these?

Hypertherm Plasma Cutter discussion forum.
Post Reply
i_r_machinist
2.5 Star Member
2.5 Star Member
Posts: 131
Joined: Mon Oct 18, 2010 3:22 pm

Lost CPC upgrade instructions! Anyone have these?

Post by i_r_machinist »

I bought the 228697 cpc upgrade for my 85 from Hypermax, and lost the instructions! Anyone have these that they can share?
thanks
i_r_
tcaudle
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1353
Joined: Tue Feb 28, 2012 6:47 pm

Re: Lost CPC upgrade instructions! Anyone have these?

Post by tcaudle »

Hypertherm has all of their manuals, field service bulletins and service manuals on line.
jimcolt
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3087
Joined: Mon Jul 20, 2009 11:18 pm
Location: North Carolina

Re: Lost CPC upgrade instructions! Anyone have these?

Post by jimcolt »

The file is too large to attach here, if you email me at jim.colt@hypertherm.com I can email them to you. technical.service@hypertherm.com can do the same. Jim Colt
i_r_machinist
2.5 Star Member
2.5 Star Member
Posts: 131
Joined: Mon Oct 18, 2010 3:22 pm

Re: Lost CPC upgrade instructions! Anyone have these?

Post by i_r_machinist »

Went back through my email and found the order confirmation letter from Hypermax. Called the number and a very helpful young lady emailed me a pdf in about 3 minutes. Good to see someone still has customer support. Put the cpc port in this morning and ordered the mechanical torch too. I just need to order that plasmacam interface cable and I'll be in a whole different league!
thanks
i_r_
Post Reply

Return to “Hypertherm Plasma Cutters”