Hello
I have the powermax 65, recently the height control stopped working mainly for the thicker material. As soon as it cuts the out side it jams as if it isn't lifting quicker enough. The only way its working is to disable it ,let the torch pierce and run for a few sec then disable it. After disabled the touch lifts. Anyone know what may be wrong
thanks
Height control not working
-
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: Height control not working
The Powermax65 is your plasma cutter (Hypertherm), so if you would like help troubleshooting your height control you need to let us know what brand and model cnc machine and details about the height control and software, etc.
Jim Colt
Jim Colt
Nibex wrote:Hello
I have the powermax 65, recently the height control stopped working mainly for the thicker material. As soon as it cuts the out side it jams as if it isn't lifting quicker enough. The only way its working is to disable it ,let the torch pierce and run for a few sec then disable it. After disabled the touch lifts. Anyone know what may be wrong
thanks
-
- 1/2 Star Member
- Posts: 7
- Joined: Wed Jul 23, 2014 9:09 am
Re: Height control not working
we are using mach 3 software
Our machine is from cnc clearcut (www.cncclercut.co.za)
Our machine is from cnc clearcut (www.cncclercut.co.za)
-
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: Height control not working
The link you supplied does not work.
Nibex wrote:we are using mach 3 software
Our machine is from cnc clearcut (http://www.cncclercut.co.za)
-
- 3 Star Member
- Posts: 395
- Joined: Sun Jan 02, 2011 11:03 pm
Re: Height control not working
He left out an "a" from the link. Corrected: http://www.cncclearcut.co.za/