SBC Motor Mounts
-
Guilty ByDesign
- 1/2 Star Member
- Posts: 5
- Joined: Mon Mar 28, 2011 8:35 pm
SBC Motor Mounts
Heres some modular small block chevy motor mounts ive designed, just assemble, plug weld, and go. I wouldn't recommend cutting with a plasma tho.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
Gamelord
- 4.5 Star Member
- Posts: 1637
- Joined: Wed Aug 29, 2012 5:17 pm
- Contact:
Re: SBC Motor Mounts
Why not cut with a plasma?
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
-
JJsCustomDesigns
- 3.5 Star Member
- Posts: 599
- Joined: Thu Jul 07, 2011 12:29 pm
- Location: Nebraska
Re: SBC Motor Mounts
Thanks for posting. Can never have too much SBC stuff.
I modified the Square holes in your design to a slot. Hope you dont mind. Idk bout anyone else. I dont like cutting small square holes and neither does my plasma.
I modified the Square holes in your design to a slot. Hope you dont mind. Idk bout anyone else. I dont like cutting small square holes and neither does my plasma.
Last edited by JJsCustomDesigns on Sun Jun 23, 2013 8:53 pm, edited 1 time in total.
"There are bigger things planned for you in your life, be patient"
Im on the prowl for a good used Hypertherm Plasma with hand torch.
PM me with details
Thanks
Im on the prowl for a good used Hypertherm Plasma with hand torch.
PM me with details
Thanks
-
Guilty ByDesign
- 1/2 Star Member
- Posts: 5
- Joined: Mon Mar 28, 2011 8:35 pm
Re: SBC Motor Mounts
My experiences with plasma is they aren't exact enough for the alignment tabs to fit snugly.
-
WSS
- 3 Star Member
- Posts: 427
- Joined: Wed Sep 29, 2010 12:19 am
Re: SBC Motor Mounts
Freeze your thc and slow ipm by 50 to 75%. You can get a 32nd easy, if your pinions are tight and motion is good, you can repeat it every time once your kerf is set.Guilty ByDesign wrote:My experiences with plasma is they aren't exact enough for the alignment tabs to fit snugly.
Cheers!
WSS
