Marine Corps Emblem/Logo

[04 Marine]

Hi Folks,

Mostly I have airplane weather vanes but I am also a retired Marine Major. I would really like to find a detailed DXF of the Eagle...Globe...and Anchor, or the seal within rope. I've been looking for a file to post and I think I found one that I will post later today. I'm in my 60's and headed off to physical therapy right now. That's what happens when your young and you believe yourself to be indestructable. I flew some 350 combat missions as a door gunner when I was a young Marine Sergeant.

Later, I'll post a DXF of a geodesic dome built of stars, it folds together and casts stars all over the room when a candle is placed inside.

[Brenham Iron Works]

I am working on an ugly angel for my dad and some of his vietnam marine buddies. Hopefully I will get it finished and uploaded soon.

[ironhardt]

Hi Folks,

Mostly I have airplane weather vanes but I am also a retired Marine Major. I would really like to find a detailed DXF of the Eagle...Globe...and Anchor, or the seal within rope. I've been looking for a file to post and I think I found one that I will post later today. I'm in my 60's and headed off to physical therapy right now. That's what happens when your young and you believe yourself to be indestructable. I flew some 350 combat missions as a door gunner when I was a young Marine Sergeant.

Later, I'll post a DXF of a geodesic dome built of stars, it folds together and casts stars all over the room when a candle is placed inside.

First, I would like to thank you for your service to our country, sir. Words can never fully convey how I feel for the veterans and their families.

I am currently working on the Marine Corps Emblem, and have been for the past 4 days. It is one of the more time consuming projects that I have undertaken since I did the Maryland Terrapins logo. I will have it completed today, hopefully before 2 PM. I plan to cut this out for my 75 year old father who is also a retried Marine of the Korean War.

[TRoss]

Hi Folks,

Mostly I have airplane weather vanes but I am also a retired Marine Major. I would really like to find a detailed DXF of the Eagle...Globe...and Anchor, or the seal within rope. I've been looking for a file to post and I think I found one that I will post later today. I'm in my 60's and headed off to physical therapy right now. That's what happens when your young and you believe yourself to be indestructable. I flew some 350 combat missions as a door gunner when I was a young Marine Sergeant.

Later, I'll post a DXF of a geodesic dome built of stars, it folds together and casts stars all over the room when a candle is placed inside.

'04 Marine,
I too would like to thank you and all the servicemen, women and families for their sacrifices for our country.

Here's a Marine Logo that I drew up about a year ago for my cousin. I hope it will help you.

Thanks again!!!!

Marine Globe Anchor Eagle 10in.dxf

[ironhardt]

Got it done a little early.

USMC.dxf

[04 Marine]

Thanks Folks,

But no thanks for service is required. In 24 years, I had more fun than the law very likely allowed. I entered the Corps in 1966 right out of high school. During my career, I served with HMM-364's Purple Foxes as a .50 Cal. door gunner. I spent one tour as a Marine Corps Drill Instructor and was then selected to Warrant Officer and finally retired as a Major. Mean while the Corps sent me to college for a BS then to college for a MBA and back a couple more time to finally retire with a PhD. I've managed large airports, air traffic control facilities and owned an aviation fuel service. Now I'm retired and having fun.

Here is a copy of the HMH-362 Logo.

Many thanks for all the support.

Glen

Hmm362logo.gif

[Heatherjo350]

I wish I didn't have to do this, but does anyone have any Marine Corps logos that I could use something straight foward would be best. I have not only misplaced my own personal files but when I log on here all the files are missing also. If I could get any help I would be so greatful!!!

[Loyd]

Here you go.
Loyd

Marine Globe Anchor Eagle 10in.dxf

USMC.dxf

[Heatherjo350]

Thanks a ton Loyd! Please know that you have save my rear, not that you want to know but you did! Thank you so much and if there is ever anything I can do for you let me know!

[Loyd]

Well, first let's give credit where credit is due. You are welcome as far as I posted them. The authors of those files were kind
enough to share them. They did the hard work for which I applaud them. Naturally, I think the files are great because of the
content. I pale in comparison to 04 marines career, but nonetheless I also will forever be a Marine. I thank all the people
on this site that contribute their hard work.
Thanks to one and all!
Loyd

PS Admin, have a great day and don't sweat the small stuff, you do a great job!

[admin]

Hi Loyd

Thanks for the kind words and sound advice. I pieced this thread back together the best I could and have requested any remaining missing files from the original author/member. Thanks for your support and enjoy the holidays.

Admin

[texasmetalart]

Here's one we do, hope it helps.

Marines WH NEW.dxf

[Traneman]

ironhardt,
Have you tried cutting your dxf yet?,it just looks so detailed was wondering how it cuts.

Thank you

[ironhardt]

Traneman, I am currently using an old Vulcan 1800 plasma cutter that has seen better days. Using 14 ga black iron, and keeping in mind that I need to have at least 1/8" of material left to have everything stay together; the diameter of the whole logo is 30". It turned out really well, and every Marine here at the shop and their Marine buddies is now urging me to make them one. Funny how that happens.

[Traneman]

Awesome.......ok I'm going to cut one today for my dad to give on his birthday.I know he will be so excited.

Thanks so much

[ironhardt]

Awesome.......ok I'm going to cut one today for my dad to give on his birthday.I know he will be so excited.

Thanks so much

How did it work out for you, Traneman?

[Brenham Iron Works]

Here is the ugly angels that got lost. To my understanding, this is the original logo. Somewhere down the line it got modified,and looks like the one posted previos. Not sure. This is what my dad told me and he has this patch from Vietnam.

Uangels.dxf

[Traneman]

Sorry I got kinda busy,,,,,It cut out great,getting it powder coated and hope to give it to him Friday.
I didnt have to tweak it at all.
Thanks again for the file.

[ironhardt]

Sorry I got kinda busy,,,,,It cut out great,getting it powder coated and hope to give it to him Friday.
I didnt have to tweak it at all.
Thanks again for the file.

I am glad to hear that it worked out for you. Semper Fi!

[hdfaster]

Here's one eagle globe and anchor that I cut with plasma. I will upload some more later.

EAGLE GLOBE and ANCHOR.dxf

[bigj121]

Old Navy guy here. Was stationed with the Marines for 4 years a few years ago. Does anyone have the Navy plaque? I tried to alter the Marine one, but cannot touch the Marines!

Thanks!

[hdfaster]

Sure, the Marine Corps is a department of the Navy, but it's the MENS department!!!

Just kidding, Thanks for the ride

AIR FORCE.dxf

ARMY.dxf

UNITED STATES NAVY LOGO (CP).dxf

[Loyd]

Thanks for the file.
Loyd

[hdfaster]

I cut these out of small left over brass and stainless. I carry a bunch in the saddle bags of my scoot and give them to vets when I meet them. I've seen them on Harley windsheilds, truck dash boards,tool boxes... I've given out over a thousand of these and still love the reaction I get just for giving these away and saying thanks for your service.

MIL. BRANCHES.dxf

[rwehavinfunyet]

This cut out great thanks so much!

2011-06-24_17.05.55.jpg