A present for your supplier-Business Card Base
-
- 1/2 Star Member
- Posts: 6
- Joined: Wed Jan 27, 2016 3:31 pm
Re: A present for your supplier-Business Card Base
how are you guys downloading a DXF. file and editing it? I have ran across this a few times. Id like to personalize this file for my biz. any ideas? I use inkscape and solid works 2d.
-
- 3.5 Star Member
- Posts: 681
- Joined: Wed Nov 26, 2014 5:12 pm
Re: A present for your supplier-Business Card Base
Download the file then import it to Inkscape to do your editing
-
- 1/2 Star Member
- Posts: 6
- Joined: Wed Jan 27, 2016 3:31 pm
Re: A present for your supplier-Business Card Base
for some reason this file wont do that for me... I tried a few others and it worked... Thanks!
-
- 1.5 Star Member
- Posts: 31
- Joined: Sun Sep 28, 2014 10:11 pm
Re: A present for your supplier-Business Card Base
I would like to ask Art & Fire what font he used on the word "Linde". It looks like it would cut very nice. Thanks in advance.
LDR 4x8 Water Table
Hypertherm 65 Machine Torch
Sheet Cam
Mach 3
Hypertherm 65 Machine Torch
Sheet Cam
Mach 3
- art&fire
- 2 Star Member
- Posts: 96
- Joined: Mon Apr 25, 2011 4:37 pm
Re: A present for your supplier-Business Card Base
Sorry for the late reply.
I did not use a font for the name Linde. It is actually a trace of their company logo.
I did not use a font for the name Linde. It is actually a trace of their company logo.
-
- 1 Star Member
- Posts: 15
- Joined: Tue May 10, 2016 8:01 pm
Re: A present for your supplier-Business Card Base
Thanks for the file. It cut just lovely...
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2647
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: A present for your supplier-Business Card Base
camjeep3 wrote:for some reason this file wont do that for me... I tried a few others and it worked... Thanks!
See if this will open for you, OK
Wasn't sure if that was the one you wanted, just went back and loaded the last DXF, if it's a different one you want just let me know, but open this one first and see if that works for you.
Larry
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3 Star Elite Contributing Member
- Posts: 316
- Joined: Sat Oct 08, 2016 12:26 pm
Re: A present for your supplier-Business Card Base
Thanks
plasmacam 4x8 with DHC2 with Design Edge
Hypertherm 65
Hypertherm 65
- csplazma1
- 1.5 Star Member
- Posts: 33
- Joined: Thu Nov 19, 2015 12:00 pm
- Location: Bismarck ND
- Contact:
Re: A present for your supplier-Business Card Base
Did this yesterday just to see how the bends would work out. Used 14 gauge and escalade white powder coat from Prismatic powders.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
C&S PlaZma Metal Works
LDR Motion Systems 4X8 Water Bladder
Hypertherm Powermax 85 Machine Torch
Everlast PowerPlasma 60 Handheld Torch
Thunder Laser NOVA 51
LDR Motion Systems 4X8 Water Bladder
Hypertherm Powermax 85 Machine Torch
Everlast PowerPlasma 60 Handheld Torch
Thunder Laser NOVA 51
-
- 1 Star Member
- Posts: 16
- Joined: Wed Mar 18, 2015 5:29 pm
Re: A present for your supplier-Business Card Base
thanks for the file
-
- 1/2 Star Member
- Posts: 3
- Joined: Sat May 06, 2017 10:09 pm
Re: A present for your supplier-Business Card Base
Capstone wrote:This has been a great way to use up some scrap 16ga.
Some of you might go to ARC3 for your welding supplies, so please make one for your local supplier too. If you see one already on the counter, you'll know it was from here.
Could someone please reach out I'd love to use this file but I don't have the talent to replace it with my logo.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7792
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: A present for your supplier-Business Card Base
Here is how to do it so you know next time. Download Capstone's file then in Inkscape using the node tool remove adjacent nodes to disconnect the top from the bottom then remove all top nodes, and then connect the top nodes to form a line at the top. see images below.
Then add your logo and attach it by just connection the two drawings and use the union tool under path highlight one by holding down the shift key then the other.
Then add your logo and attach it by just connection the two drawings and use the union tool under path highlight one by holding down the shift key then the other.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1/2 Star Member
- Posts: 3
- Joined: Sat May 06, 2017 10:09 pm
Re: A present for your supplier-Business Card Base
Could I have this cut file or a 6 card holder?Eggman wrote:Here's my version.
-
- 1/2 Star Member
- Posts: 1
- Joined: Sat Feb 03, 2018 9:57 am
Re: A present for your supplier-Business Card Base
thanks, looks great,
-
- 2.5 Star Elite Contributing Member
- Posts: 108
- Joined: Thu Aug 24, 2017 7:00 pm
Re: A present for your supplier-Business Card Base
This is great! Thank you for sharing!!
-
- 1.5 Star Member
- Posts: 47
- Joined: Sat Dec 09, 2017 4:34 pm
Re: A present for your supplier-Business Card Base
Thanks for the share
-
- 1/2 Star Member
- Posts: 4
- Joined: Fri Aug 10, 2018 6:21 am
Re: A present for your supplier-Business Card Base
Whhere can i get this download?
-
- 5 Star Elite Contributing Member
- Posts: 2606
- Joined: Thu Jul 24, 2008 11:15 am
Re: A present for your supplier-Business Card Base
Go to the first page of this thread for the dxfJoshwelder123 wrote:Whhere can i get this download?
-
- 1.5 Star Elite Contributing Member
- Posts: 49
- Joined: Sat Jul 20, 2013 12:42 am
- Contact:
Re: A present for your supplier-Business Card Base
4X4 Plasma Cam DHC2
w/down draft Hypertherm 45
3x4x6 home made powder coating oven
w/down draft Hypertherm 45
3x4x6 home made powder coating oven
-
- 1/2 Star Member
- Posts: 1
- Joined: Thu Oct 11, 2018 2:21 pm
Re: A present for your supplier-Business Card Base
Thanks for the Share!