A present for your supplier-Business Card Base

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
camjeep3
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Wed Jan 27, 2016 3:31 pm

Re: A present for your supplier-Business Card Base

Post by camjeep3 »

how are you guys downloading a DXF. file and editing it? I have ran across this a few times. Id like to personalize this file for my biz. any ideas? I use inkscape and solid works 2d.
Old Iron
3.5 Star Member
3.5 Star Member
Posts: 681
Joined: Wed Nov 26, 2014 5:12 pm

Re: A present for your supplier-Business Card Base

Post by Old Iron »

Download the file then import it to Inkscape to do your editing
camjeep3
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Wed Jan 27, 2016 3:31 pm

Re: A present for your supplier-Business Card Base

Post by camjeep3 »

for some reason this file wont do that for me... I tried a few others and it worked... Thanks!
tumbleweed
1.5 Star Member
1.5 Star Member
Posts: 31
Joined: Sun Sep 28, 2014 10:11 pm

Re: A present for your supplier-Business Card Base

Post by tumbleweed »

I would like to ask Art & Fire what font he used on the word "Linde". It looks like it would cut very nice. Thanks in advance.
LDR 4x8 Water Table
Hypertherm 65 Machine Torch
Sheet Cam
Mach 3
User avatar
art&fire
2 Star Member
2 Star Member
Posts: 96
Joined: Mon Apr 25, 2011 4:37 pm

Re: A present for your supplier-Business Card Base

Post by art&fire »

Sorry for the late reply.
I did not use a font for the name Linde. It is actually a trace of their company logo.
weldcutbend
1 Star Member
1 Star Member
Posts: 15
Joined: Tue May 10, 2016 8:01 pm

Re: A present for your supplier-Business Card Base

Post by weldcutbend »

Thanks for the file. It cut just lovely...

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: A present for your supplier-Business Card Base

Post by Larry83301 »

camjeep3 wrote:for some reason this file wont do that for me... I tried a few others and it worked... Thanks!

See if this will open for you, OK :D :D
BUSINESS_CARD_HOLDER FIVE POINTS RX -1.DXF
Wasn't sure if that was the one you wanted, just went back and loaded the last DXF, if it's a different one you want just let me know, but open this one first and see if that works for you.

Larry

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Rex
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 316
Joined: Sat Oct 08, 2016 12:26 pm

Re: A present for your supplier-Business Card Base

Post by Rex »

Thanks
plasmacam 4x8 with DHC2 with Design Edge
Hypertherm 65
User avatar
csplazma1
1.5 Star Member
1.5 Star Member
Posts: 33
Joined: Thu Nov 19, 2015 12:00 pm
Location: Bismarck ND
Contact:

Re: A present for your supplier-Business Card Base

Post by csplazma1 »

Card Holder.jpg
Did this yesterday just to see how the bends would work out. Used 14 gauge and escalade white powder coat from Prismatic powders.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

C&S PlaZma Metal Works
LDR Motion Systems 4X8 Water Bladder
Hypertherm Powermax 85 Machine Torch
Everlast PowerPlasma 60 Handheld Torch
Thunder Laser NOVA 51
wickedpig
1 Star Member
1 Star Member
Posts: 16
Joined: Wed Mar 18, 2015 5:29 pm

Re: A present for your supplier-Business Card Base

Post by wickedpig »

thanks for the file
AM_I_Missing
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Sat May 06, 2017 10:09 pm

Re: A present for your supplier-Business Card Base

Post by AM_I_Missing »

Capstone wrote:This has been a great way to use up some scrap 16ga.
20160317_182739.jpg
Some of you might go to ARC3 for your welding supplies, so please make one for your local supplier too. If you see one already on the counter, you'll know it was from here. :)
ARC3 2-Place Business Card holder.svg

Could someone please reach out I'd love to use this file but I don't have the talent to replace it with my logo.
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: A present for your supplier-Business Card Base

Post by acourtjester »

Here is how to do it so you know next time. Download Capstone's file then in Inkscape using the node tool remove adjacent nodes to disconnect the top from the bottom then remove all top nodes, and then connect the top nodes to form a line at the top. see images below.
Then add your logo and attach it by just connection the two drawings and use the union tool under path highlight one by holding down the shift key then the other.
card holder.jpg
card holder1.jpg
card holder2.jpg
card holder4.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
AM_I_Missing
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Sat May 06, 2017 10:09 pm

Re: A present for your supplier-Business Card Base

Post by AM_I_Missing »

Eggman wrote:Here's my version.
Could I have this cut file or a 6 card holder?
Ken Marple
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Sat Feb 03, 2018 9:57 am

Re: A present for your supplier-Business Card Base

Post by Ken Marple »

thanks, looks great,
MrsSavage
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 108
Joined: Thu Aug 24, 2017 7:00 pm

Re: A present for your supplier-Business Card Base

Post by MrsSavage »

This is great! Thank you for sharing!!
Strawboss
1.5 Star Member
1.5 Star Member
Posts: 47
Joined: Sat Dec 09, 2017 4:34 pm

Re: A present for your supplier-Business Card Base

Post by Strawboss »

Thanks for the share
Joshwelder123
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Fri Aug 10, 2018 6:21 am

Re: A present for your supplier-Business Card Base

Post by Joshwelder123 »

Whhere can i get this download?
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2567
Joined: Thu Jul 24, 2008 11:15 am

Re: A present for your supplier-Business Card Base

Post by plasmanewbie »

Joshwelder123 wrote:Whhere can i get this download?
Go to the first page of this thread for the dxf :D
recon44095
1.5 Star Elite Contributing Member
1.5 Star Elite Contributing Member
Posts: 49
Joined: Sat Jul 20, 2013 12:42 am
Contact:

Re: A present for your supplier-Business Card Base

Post by recon44095 »

Image
4X4 Plasma Cam DHC2
w/down draft Hypertherm 45
3x4x6 home made powder coating oven
Thachad15
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Thu Oct 11, 2018 2:21 pm

Re: A present for your supplier-Business Card Base

Post by Thachad15 »

Thanks for the Share!
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”