Vertical bender using JD2 dies

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
cypher
2 Star Member
2 Star Member
Posts: 59
Joined: Tue Aug 25, 2009 11:30 am

Re: Vertical bender using JD2 dies

Post by cypher »

That's exactly what i was looking for. would you mind posting those files of the square tube dies? please and thanks
I Lean
3 Star Member
3 Star Member
Posts: 395
Joined: Sun Jan 02, 2011 11:03 pm

Re: Vertical bender using JD2 dies

Post by I Lean »

cypher wrote:That's exactly what i was looking for. would you mind posting those files of the square tube dies? please and thanks
Sure, why not.

There is no follower die, I just used the normal 7/8" pin and let the square tube rest against it.
Square tube bender die.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

tjenus
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 183
Joined: Mon Jun 06, 2011 11:14 am
Location: Kelso

Re: Vertical bender using JD2 dies

Post by tjenus »

Thank you! I might not use it, I'm between this and just buying the Rogue Fab
No problems,
Has anybody bent square tubing on this ?
Jim
Square tube is all that I can make at my shop, No mill to cut out the center section, they all worked good for that, thanks KH
5x10 Flow Waterjet
james.davis
4 Star Member
4 Star Member
Posts: 1009
Joined: Mon May 21, 2012 3:58 pm
Location: spanaway wa.

Re: Vertical bender using JD2 dies

Post by james.davis »

Ilean,
I noticed on your bender you have 2 springs is that needed or will one work?
Thanks,
Jim
I Lean
3 Star Member
3 Star Member
Posts: 395
Joined: Sun Jan 02, 2011 11:03 pm

Re: Vertical bender using JD2 dies

Post by I Lean »

james.davis wrote:Ilean,
I noticed on your bender you have 2 springs is that needed or will one work?
Thanks,
Jim
One will work fine. I went with too light of a spring originally, so I had to double them up.
james.davis
4 Star Member
4 Star Member
Posts: 1009
Joined: Mon May 21, 2012 3:58 pm
Location: spanaway wa.

Re: Vertical bender using JD2 dies

Post by james.davis »

Thanks,
Jim
james.davis
4 Star Member
4 Star Member
Posts: 1009
Joined: Mon May 21, 2012 3:58 pm
Location: spanaway wa.

Re: Vertical bender using JD2 dies

Post by james.davis »

http://www.plasmaspider.com/download/fi ... w&id=41443
Ilean,
Sorry to bug you some much but are these holes close on your file or did I screw up when I copied it.
The holes are about an 1/8" away from each other.Will it matter?
Thanks,
Jim
bender arm holes.zip

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

I Lean
3 Star Member
3 Star Member
Posts: 395
Joined: Sun Jan 02, 2011 11:03 pm

Re: Vertical bender using JD2 dies

Post by I Lean »

I can't see your file...but there are some holes that are pretty close to each other for sure. That's how they are on the JD2 drawing I started with.
mmw
1 Star Member
1 Star Member
Posts: 10
Joined: Wed Feb 09, 2011 10:59 pm

Re: Vertical bender using JD2 dies

Post by mmw »

Thanks, going to mod to fit my pt105
Gary
I Lean
3 Star Member
3 Star Member
Posts: 395
Joined: Sun Jan 02, 2011 11:03 pm

Re: Vertical bender using JD2 dies

Post by I Lean »

If you already have a PT105, you can just bolt the existing bender into the lower/base part to make it into a vertical bender, if you want to do that. I have done that a couple times, so I can post that file if you want to that direction.
mmw
1 Star Member
1 Star Member
Posts: 10
Joined: Wed Feb 09, 2011 10:59 pm

Re: Vertical bender using JD2 dies

Post by mmw »

Sure thanks, Are the pin holes in a different location?
I Lean
3 Star Member
3 Star Member
Posts: 395
Joined: Sun Jan 02, 2011 11:03 pm

Re: Vertical bender using JD2 dies

Post by I Lean »

mmw wrote:Sure thanks, Are the pin holes in a different location?
Sorry, missed this! What I meant was just the brackets to mount the existing Pro Tools bender vertically. This is the file I've used a couple times to do that.
PT105 vertical mount.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

mav68erick
1 Star Member
1 Star Member
Posts: 18
Joined: Sat Aug 27, 2011 11:16 am

Re: Vertical bender using JD2 dies

Post by mav68erick »

Hello, I cut this file out over 5 Years ago for a friend that passed away and got back the vertical uprights. He wasn't able to finish it. I wanna finish it but no longer have the word doc that has the dimensions for the base.

Can anyone share the lengths of of the 3x3 tubing?

Thanks, I finally got my plasma cutter back online after moving and getting back into into things.
tjenus
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 183
Joined: Mon Jun 06, 2011 11:14 am
Location: Kelso

Re: Vertical bender using JD2 dies

Post by tjenus »

Not sure if this is what you need, thanks KH
Parts list for completing vertical bender.docx

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

5x10 Flow Waterjet
mav68erick
1 Star Member
1 Star Member
Posts: 18
Joined: Sat Aug 27, 2011 11:16 am

Re: Vertical bender using JD2 dies

Post by mav68erick »

I'm not a member atm so I don't open that. If I remember correctly it was 2 pcs at 18" and 2 at 24" but wanna make sure before I cut my tubing. I know it doesn't have to be exact I just want to know because you it's what obviously works
mav68erick
1 Star Member
1 Star Member
Posts: 18
Joined: Sat Aug 27, 2011 11:16 am

Re: Vertical bender using JD2 dies

Post by mav68erick »

Double posted.
tjenus
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 183
Joined: Mon Jun 06, 2011 11:14 am
Location: Kelso

Re: Vertical bender using JD2 dies

Post by tjenus »

Tubing for base: 3x3 square; Two 12” lengths, two 24” lengths.
5x10 Flow Waterjet
mav68erick
1 Star Member
1 Star Member
Posts: 18
Joined: Sat Aug 27, 2011 11:16 am

Re: Vertical bender using JD2 dies

Post by mav68erick »

Thank you!
redheadfred
2 Star Member
2 Star Member
Posts: 72
Joined: Thu Apr 21, 2016 5:37 pm

Re: Vertical bender using JD2 dies

Post by redheadfred »

Has anyone made one of the square dies yet ? The dxf file doesn't seem to have the center of the die needed to dent the tubing .
Arclight 4x4
Hypertherm Pm45
Lincoln 256 Mig
Precision Tig 275
Baileigh 50 Ton Press
Quincy 2 stage 5Hp compressor
redheadfred
2 Star Member
2 Star Member
Posts: 72
Joined: Thu Apr 21, 2016 5:37 pm

Re: Vertical bender using JD2 dies

Post by redheadfred »

Figured it out .... Thanks
Arclight 4x4
Hypertherm Pm45
Lincoln 256 Mig
Precision Tig 275
Baileigh 50 Ton Press
Quincy 2 stage 5Hp compressor
Flawlessfab22
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Fri Oct 27, 2017 5:33 pm

Re: Vertical bender using JD2 dies

Post by Flawlessfab22 »

I can’t seem to get access to the bender dxf file at the beginning post
I’m a paying member
There something I’m missing
I Lean
3 Star Member
3 Star Member
Posts: 395
Joined: Sun Jan 02, 2011 11:03 pm

Re: Vertical bender using JD2 dies

Post by I Lean »

I don't know why you can't download the files, but I do think it's awesome this thread is still trickling along after 5 years. :D
Prototypetom
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Tue Jul 04, 2017 5:24 am

Re: Vertical bender using JD2 dies

Post by Prototypetom »

Can this be used with model 3 dies that's all I can get
I Lean
3 Star Member
3 Star Member
Posts: 395
Joined: Sun Jan 02, 2011 11:03 pm

Re: Vertical bender using JD2 dies

Post by I Lean »

Yes, it's designed for use with Model 3 die sets.
Prototypetom
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Tue Jul 04, 2017 5:24 am

Re: Vertical bender using JD2 dies

Post by Prototypetom »

fantasic going to give it a cut in next few weeks
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”