Lighthouse DXF File For Plasma Cutting
-
- 1/2 Star Member
- Posts: 8
- Joined: Tue Jul 21, 2009 9:07 pm
Lighthouse DXF File For Plasma Cutting
Anyone have any lighthouse files would really appreciate any...thanks
-
- 1/2 Star Member
- Posts: 8
- Joined: Tue Jun 02, 2009 11:08 am
Re: Lighthouse
Nothing great but it is a lighthouse.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1/2 Star Member
- Posts: 6
- Joined: Sat Jul 25, 2009 10:53 pm
Re: Lighthouse
Thanks a bunch really appreciatedTim wrote:Nothing great but it is a lighthouse.
will contribute soon, " Great site thanks Administrator"
-
- 2.5 Star Elite Contributing Member
- Posts: 177
- Joined: Sun Jul 18, 2010 7:59 pm
Re: Lighthouse DXF File For Plasma Cutting
Great file Tim. Took this one and then put it in my sheet metal break and bent it along the lines from the top windows to the base and gave it a 3D look so far everyone loves it.
- AnotherDano
- 4 Star Member
- Posts: 806
- Joined: Fri Dec 18, 2009 11:52 pm
- Location: Laramie, Wyoming
- Contact:
Re: Lighthouse DXF File For Plasma Cutting
Great idea. I'm finding that a little added dimension like that really works.eggauto wrote:Great file ellard. took this one and then put it in my sheet metal break and bent it along the lines from the top windows to the base and gave it a 3D look so far everyone loves it.
The bottoms of oxy cylinders were stacking up from a gong-making session and were in the way. So I cut out a saguaro cactus and welded it to the side of one. Coated the base rust brown and the cactus in grass green. The bending was initially to make the cactus fit better on the round side of the base, but turned out to be popular because it wasn't 'plain ol' flat'.
Go figure,,,
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Last edited by AnotherDano on Sun Aug 01, 2010 6:23 pm, edited 1 time in total.
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
-
- 1.5 Star Member
- Posts: 38
- Joined: Tue May 25, 2010 9:24 am
- Location: The Nederlands
Re: Lighthouse DXF File For Plasma Cutting
Very cool my dad loves it thanks.
Cheers
Cheers
-
- 2 Star Member
- Posts: 73
- Joined: Mon Jul 27, 2009 7:29 pm
Re: Lighthouse DXF File For Plasma Cutting
Nice files - rerally nice!
Bet the Dragon DL'd 'em right away! Next stop Walmart...
Bet the Dragon DL'd 'em right away! Next stop Walmart...
- Loyd
- 3.5 Star Elite Contributing Member
- Posts: 686
- Joined: Tue Nov 03, 2009 12:28 am
- Location: Bald Knob, AR
- Contact:
Re: Lighthouse DXF File For Plasma Cutting
Here is one I did for a friend.
Loyd
Loyd
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
De inimico non loquaris sed cogites
Do not wish ill upon your enemies, plan it.
Do not wish ill upon your enemies, plan it.
-
- 1 Star Member
- Posts: 16
- Joined: Fri Nov 06, 2009 9:05 am
Re: Lighthouse DXF File For Plasma Cutting
Thanks Loyd
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2647
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Lighthouse DXF File For Plasma Cutting
Here is what I did with the Lighthouse that davek posted. Hope you like it.
Larry
Larry
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Loyd
- 3.5 Star Elite Contributing Member
- Posts: 686
- Joined: Tue Nov 03, 2009 12:28 am
- Location: Bald Knob, AR
- Contact:
Re: Lighthouse DXF File For Plasma Cutting
That's nice.
Loyd
Loyd
De inimico non loquaris sed cogites
Do not wish ill upon your enemies, plan it.
Do not wish ill upon your enemies, plan it.
-
- 2 Star Member
- Posts: 74
- Joined: Wed Oct 11, 2017 9:20 pm
Re: Lighthouse DXF File For Plasma Cutting
Thank you for the share