File looks good to me, not sure what you mean.CNCCAJUN wrote:Nice file, but I just realized the "G" in GRIPS is not all there . . .
Thanks,
Steve
Vise Grips Rack
-
- 3 Star Member
- Posts: 450
- Joined: Sun Sep 08, 2013 2:17 pm
- Location: Manitoba
Re: Vise Grips Rack
Jason Lyon
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
-
- 2 Star Member
- Posts: 91
- Joined: Fri Oct 07, 2011 10:57 am
- Location: Eastern Wa
Re: Vise Grips Rack
Definitely saving that. Thanks
- CNCCAJUN
- 4 Star Member
- Posts: 1108
- Joined: Mon Dec 26, 2011 11:38 pm
- Location: Baton Rouge, LA
Re: Vise Grips Rack
When I open in AutoCAD the bottom of the "G" is missing in GRIPS
When I open with DraftSight everything is just fine . . .
Steve
When I open with DraftSight everything is just fine . . .
Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: Vise Grips Rack
Nice original file, love the hanging one as well!! Very nice thanks,,
Steve, the G was all there when I opened with corel..
Steve, the G was all there when I opened with corel..
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics
-
- 2 Star Member
- Posts: 72
- Joined: Wed Feb 05, 2014 5:17 pm
- Location: Dallas Texas
Re: Vise Grips Rack
This will be put to GREAT use.
THANK YOU very much
Mike
THANK YOU very much
Mike
-
- 1/2 Star Member
- Posts: 2
- Joined: Mon May 12, 2014 8:35 am
Re: Vise Grips Rack
Thanks for sharing the file.
-
- 2.5 Star Elite Contributing Member
- Posts: 132
- Joined: Sun Dec 08, 2013 3:53 pm
Re: Vise Grips Rack
thank you so much for the post of this tool rack . highly appreciated .Anyone happen to know the actual dimension's ? when I imported turned out to be 15X5". Anyone got anything different ? thxs in advance
- billyeagley
- 3 Star Elite Contributing Member
- Posts: 359
- Joined: Tue Jun 05, 2012 7:11 pm
Re: Vise Grips Rack
Very practical file! Thanks!
PlasmaCAM 5x10 (Samson) - DesignEdge - Hypertherm Powermax 65
-
- 1/2 Star Member
- Posts: 2
- Joined: Fri Apr 25, 2014 6:54 pm
Re: Vise Grips Rack
Thanks! Maybe I will be able to find them when I need them now. I spend more time looking for vise grips and tape measures than I do working.
-
- 2.5 Star Member
- Posts: 150
- Joined: Sat Dec 21, 2013 11:13 pm
- Location: Hallsville, Tx
- Contact:
Re: Vise Grips Rack
Thanks!!!
Stephen W. Sparks RN,CRN
Creating Sparks Metal Worx
Arclight Dynamics Arc Pro 12000 5X10
Linux, Sheetcam, Inkscape, Solid Edge
Hypertherm 85
MIllermatic 175
AHP Alphatig 200X
Kool Koat 3.0 DPW
"Ridin around having a big time!"
Creating Sparks Metal Worx
Arclight Dynamics Arc Pro 12000 5X10
Linux, Sheetcam, Inkscape, Solid Edge
Hypertherm 85
MIllermatic 175
AHP Alphatig 200X
Kool Koat 3.0 DPW
"Ridin around having a big time!"
-
- 2.5 Star Member
- Posts: 117
- Joined: Thu Feb 23, 2012 10:06 pm
- Location: Montana
Re: Vise Grips Rack
very nice.........will have to show hubby
Toni
Toni
- HammerDownJustin
- 3.5 Star Member
- Posts: 613
- Joined: Mon Mar 04, 2013 10:41 pm
- Location: Paradise,Tx
Re: Vise Grips Rack
Wish I had that many pairs of vice grips to justify making this..lol
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
Miller 251 Mig
And lots of other cool stuff...
-
- 1.5 Star Member
- Posts: 47
- Joined: Fri Mar 15, 2013 11:33 am
Re: Vise Grips Rack
Thanks for the file. What a great idea! I made two of them, then slightly modified the file and made a couple of hangers for my most often used air tools out of 11 and 14 ga. Worked great. Thanks again
chattacuda from Dayton, Tennessee
CandCNC electronics, Precision Plasma V rail gantry, homemade 4'x8' water table, Sharpe Air Dryer
Hyperthem 45XP, CommandCNC, Sheetcam, Corel Draw
CandCNC electronics, Precision Plasma V rail gantry, homemade 4'x8' water table, Sharpe Air Dryer
Hyperthem 45XP, CommandCNC, Sheetcam, Corel Draw
-
- 1 Star Member
- Posts: 21
- Joined: Mon Oct 07, 2013 12:13 pm
- Location: Nottingham,UK
Re: Vise Grips Rack
[quote="mdoffroad"]15 Downloads and not one thank you.......whats wrong with some of you people!
great idea m8ty thank you for sharing
great idea m8ty thank you for sharing
- CNCCAJUN
- 4 Star Member
- Posts: 1108
- Joined: Mon Dec 26, 2011 11:38 pm
- Location: Baton Rouge, LA
Re: Vise Grips Rack
Thank you again . . . . . this is the first file I have cut using SheetCAM . . . SigmaNEST is being put rest . . .
Steve
Steve
Last edited by CNCCAJUN on Wed Oct 08, 2014 8:20 pm, edited 1 time in total.
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
-
- 2.5 Star Member
- Posts: 110
- Joined: Tue Jan 29, 2013 8:22 pm
Re: Vise Grips Rack
Thanks for the file,,,
- CNCCAJUN
- 4 Star Member
- Posts: 1108
- Joined: Mon Dec 26, 2011 11:38 pm
- Location: Baton Rouge, LA
Re: Vise Grips Rack
Hello Redlunn;Redlunn wrote:Yeah, my first post!
Here is a simple rack for holding various vise grips. I don't have any type of brake so I cut reliefs at the bend points. I plan to weld it underneath my welding table.
Redlunn
The slender rectangular boxes are relief points to make bending possible without a brake, if using a brake can I assume the center of those boxes would be the bend lines?
Thanks,
Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
-
- 1.5 Star Member
- Posts: 39
- Joined: Wed Jul 29, 2009 1:21 pm
Re: Vise Grips Rack
GREAT IDEA AND I THINK EVERYONE WILL APPRECIATE THE RACK. THANKS
-
- 2 Star Member
- Posts: 54
- Joined: Fri Oct 21, 2011 9:16 pm
Re: Vise Grips Rack
cool,
thanks for the post.
Jeff M
thanks for the post.
Jeff M
-
- 1.5 Star Member
- Posts: 39
- Joined: Thu Jan 03, 2013 10:32 am
- Location: Waxahachie, Texas
Re: Vise Grips Rack
Super nice work. You did good.
Thank You,
Metalworx Fabriicators
Thank You,
Metalworx Fabriicators
Metalworx Fabricators
ArcLight Dynamics
Hypertherm Powermax 45
ArcLight Dynamics
Hypertherm Powermax 45
- CNCCAJUN
- 4 Star Member
- Posts: 1108
- Joined: Mon Dec 26, 2011 11:38 pm
- Location: Baton Rouge, LA
Re: Vise Grips Rack
Great file, but I did I make some changes so they could be used by more people . . .
I added 2" height to the back & (4) 1/4" holes . . .
Now they can be mounted to a wall, pegboard, etc . . . and still function as designed . . .
I eliminated the relief slots and had them bent on a large brake.
Also thanks to your idea I think can design a clamp rack for small Bessy Clamps for the wood shop . . .
Thanks for posting . . . .
Steve
I added 2" height to the back & (4) 1/4" holes . . .
Now they can be mounted to a wall, pegboard, etc . . . and still function as designed . . .
I eliminated the relief slots and had them bent on a large brake.
Also thanks to your idea I think can design a clamp rack for small Bessy Clamps for the wood shop . . .
Thanks for posting . . . .
Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
-
- 2.5 Star Member
- Posts: 227
- Joined: Sun Sep 27, 2009 9:48 pm
Re: Vise Grips Rack
Thanks so much!!!!
Tim
Tim
-
- 2.5 Star Member
- Posts: 229
- Joined: Sat Apr 26, 2014 7:56 pm
Re: Vise Grips Rack
Designed something very similar for Air Tools, then discovered that someone is already selling something similar.
I put Keyholes in for hanging larger circle with a slot above.
I put Keyholes in for hanging larger circle with a slot above.
-
- 2.5 Star Member
- Posts: 229
- Joined: Sat Apr 26, 2014 7:56 pm
Re: Vise Grips Rack
Here is the one I designed. I did a Vise Grip Rack so the tools hang from the adjustment screw...
I use 18Ga and bend them with an HF Brake. Look sellable at swap meets.
I use 18Ga and bend them with an HF Brake. Look sellable at swap meets.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 148
- Joined: Mon Nov 03, 2014 2:04 pm
- Location: Racine Wi
- Contact:
Re: Vise Grips Rack
I think this gives a reason to buy more vise grips.HammerDownJustin wrote:Wish I had that many pairs of vice grips to justify making this..lol