Octagonal mounting bracket

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
jdh239
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 197
Joined: Tue Jan 11, 2011 4:09 pm
Location: Payson, Utah

Octagonal mounting bracket

Post by jdh239 »

Before I make one, thought I would ask if someone else has a pattern. I am going to be putting a weather vane at the peak of an octagonal gazeebo, right at the peak. I don't yet know the pitch of the roof. Wondering what mounting options you guys may have.

I was thinking about making a 4 sided one, but haven't decided yet.
----------------------------------------
ColdCreekWorks.com
jdh239
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 197
Joined: Tue Jan 11, 2011 4:09 pm
Location: Payson, Utah

Re: Octagonal mounting bracket

Post by jdh239 »

Here is the bracket I made in case anyone else comes looking for one:
Image

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

----------------------------------------
ColdCreekWorks.com
jdh239
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 197
Joined: Tue Jan 11, 2011 4:09 pm
Location: Payson, Utah

Re: Octagonal mounting bracket

Post by jdh239 »

A couple of pics of it welded up.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

----------------------------------------
ColdCreekWorks.com
wickedinhere
4 Star Member
4 Star Member
Posts: 751
Joined: Thu Jun 09, 2011 9:03 pm

Re: Octagonal mounting bracket

Post by wickedinhere »

Nice i just saw it on pirate. Where did you get the bearings at?
jdh239
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 197
Joined: Tue Jan 11, 2011 4:09 pm
Location: Payson, Utah

Re: Octagonal mounting bracket

Post by jdh239 »

wickedinhere wrote:Nice i just saw it on pirate. Where did you get the bearings at?
Ball bearing I bought at the local hardware store. The needle bearings I picked up on ebay as they were cheaper with shipping than picking them up locally:

http://www.ebay.com/itm/360241872340?ss ... 1497.l2649
----------------------------------------
ColdCreekWorks.com
User avatar
OSAFTW
1 Star Member
1 Star Member
Posts: 19
Joined: Tue Oct 11, 2011 10:19 pm
Location: Ft. Worth, Texas
Contact:

Re: Octagonal mounting bracket

Post by OSAFTW »

Great Stuff!!! Thanks for the post!!!
Digger
OutriderOffroad.com / FlyingCowboys.net
Plasma Route 4x4
Thermal Dynamics A-40
artCAM - TurboCAD - MicroStation / SheetCam / Mach3
rotparapple
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Mon Sep 27, 2010 12:37 am

Re: Octagonal mounting bracket

Post by rotparapple »

Here is one I use
adj roof mount.pcm
adj roof mount.pcm

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
larrycameron44
3.5 Star Member
3.5 Star Member
Posts: 579
Joined: Sun Oct 31, 2010 4:12 pm
Location: Auckland New Zealand

Re: Octagonal mounting bracket

Post by larrycameron44 »

rotparapple wrote:Here is one I use
adj roof mount.pcm
adj roof mount.pcm

Don't suppose you have that in a DXF file for us Non-plasmacam plasma freaks??

Larry
NZ
User avatar
wishiwastorching
2.5 Star Member
2.5 Star Member
Posts: 108
Joined: Sat Jun 11, 2011 10:14 pm

Re: Octagonal mounting bracket

Post by wishiwastorching »

larrycameron44 wrote:
rotparapple wrote:Here is one I use
adj roof mount.pcm
adj roof mount.pcm

Don't suppose you have that in a DXF file for us Non-plasmacam plasma freaks??

Larry
NZ
oldsoulmetal
2.5 Star Member
2.5 Star Member
Posts: 108
Joined: Wed Sep 22, 2010 12:07 am

Re: Octagonal mounting bracket

Post by oldsoulmetal »

hope this helps
Image

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

metalart
4 Star Member
4 Star Member
Posts: 900
Joined: Thu Sep 03, 2009 10:43 am

Re: Octagonal mounting bracket

Post by metalart »

Thanks for sharing!
Paulinoz
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Mon Nov 28, 2011 5:41 am

Re: Octagonal mounting bracket

Post by Paulinoz »

Thanks from Oz. just starting out so these look un complicated. cheers
reidy01
2.5 Star Member
2.5 Star Member
Posts: 171
Joined: Sun Aug 21, 2011 3:32 am

Re: Octagonal mounting bracket

Post by reidy01 »

Thanks for sharing.
cat15
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Wed Nov 30, 2011 3:20 am

Re: Octagonal mounting bracket

Post by cat15 »

Thanks,
I wondered what was a good way to mount a few different things.
Have a Very Happy New Year
Rich
Colfax Dan
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Sat Jan 30, 2010 2:48 pm

Re: Octagonal mounting bracket

Post by Colfax Dan »

Thank you for sharing this design! I was just starting to design one and yours is perfect.
Dan
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”