Cool Bear Scene to share!

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
User avatar
FreeDXF.com
2.5 Star Member
2.5 Star Member
Posts: 145
Joined: Mon Mar 23, 2009 11:49 am

Cool Bear Scene to share!

Post by FreeDXF.com »

Hello Everyone,

Here is a really cool bear scene that I designed up recently. The design work should be cut around 24" wide. If anyone has a chance to cut this out please remember to post an image of the finished design work so we can all see how wonderful it turns out. I hope you all enjoy the design work.

Sincerely,
FreeDXF.com

Image
Bear Animal Scene.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Last edited by FreeDXF.com on Sun Oct 02, 2016 12:56 am, edited 1 time in total.
Image
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2644
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Cool Bear Scene to share!

Post by Larry83301 »

Thanks Jason! That looks great. I moved, so it will be another month before I can cut anything. When I get going again I will cut this and post a pic.

Larry83301
COWBOY
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Wed Jul 14, 2010 8:45 pm
Location: BELEN, NM

Re: Cool Bear Scene to share!

Post by COWBOY »

THANKS FOR DISPLAYING AND SHARING YOUR WORK. YOU ARE VERY TALENTED.
bwgsmith
3.5 Star Member
3.5 Star Member
Posts: 548
Joined: Tue May 25, 2010 11:42 am

Re: Cool Bear Scene to share!

Post by bwgsmith »

Great scene thanks.
mdoffroad
2 Star Member
2 Star Member
Posts: 94
Joined: Wed Mar 30, 2011 10:10 pm

Re: Cool Bear Scene to share!

Post by mdoffroad »

GREAT WORK!!! Thank you!!!!!!
User avatar
FreeDXF.com
2.5 Star Member
2.5 Star Member
Posts: 145
Joined: Mon Mar 23, 2009 11:49 am

Re: Cool Bear Scene to share!

Post by FreeDXF.com »

Your all very welcome! JH
Image
User avatar
akpilot
2.5 Star Member
2.5 Star Member
Posts: 201
Joined: Tue Aug 31, 2010 6:01 pm

Re: Cool Bear Scene to share!

Post by akpilot »

NICE!! Thanks Jason!! I'm also in the process of moving, I will cut it soon as I get a chance. :D
34chev
2.5 Star Member
2.5 Star Member
Posts: 235
Joined: Wed May 18, 2011 11:05 am

Re: Cool Bear Scene to share!

Post by 34chev »

That is amazing. Thanks
BILLYC
1.5 Star Member
1.5 Star Member
Posts: 33
Joined: Sat Dec 25, 2010 10:55 pm

Re: Cool Bear Scene to share!

Post by BILLYC »

Nice file thanks. however there was some cutouts that did not burn complete
the start of cut and stop of cut did not meet back up. but in cad it all looks good
when i load the dxf in the machine it shows the lines not meeting back up on some
cuts leaving the cut out tabed in but i like the file and here is the pic i cut
Image
User avatar
FreeDXF.com
2.5 Star Member
2.5 Star Member
Posts: 145
Joined: Mon Mar 23, 2009 11:49 am

Re: Cool Bear Scene to share!

Post by FreeDXF.com »

Thanks very much for sharing the cut image with the group. The problem that you are describing sounds like there is a setting within the CNC controlling software that is putting a gap at the end of the cut loop/path. The DXF files should be fully connected. Often times the settings for these CNC software programs can be adjusted to keep the pieces of the design work from dropping out and potentially contacting the gantry or cutting heads. I would suggest investigating the software controlling the CNC and see if one of those settings is set to automatically keep the design work tabbed in. Hope this helps!

Sincerely,
FreeDXF.com
1-866-439-3543
Last edited by FreeDXF.com on Mon Oct 03, 2016 7:38 pm, edited 1 time in total.
Image
aicomp
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 233
Joined: Wed Feb 02, 2011 5:15 pm
Location: Santa Anna Texas
Contact:

Re: Cool Bear Scene to share!

Post by aicomp »

Hi,
I had a little problem with the file cutting also. I will send a picture tomorrow. I cut it twice. I think the file needs to be scaled up a little. I moved a couple of lines farther apart and got some better results the second time around.
Please Jason, don't take what I say as bad. I really like your work, and have used a lot of it to create some fantastic pieces and also to learn how this stuff works. You are an artist and I admire your talent.
Mike Pennington
http://www.PenningtonFab.com
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
User avatar
FreeDXF.com
2.5 Star Member
2.5 Star Member
Posts: 145
Joined: Mon Mar 23, 2009 11:49 am

Re: Cool Bear Scene to share!

Post by FreeDXF.com »

Thanks for the feedback on the design work. This bear scene was originally designed and optimized for a CNC laser cutting system. I believe this may have been a contributing factor in the problem you experienced with the size of the overall design work being too small to accomodate the detail work. I would be interested to know what the size of your cut width was and where the trouble spots were located at within the design. Thanks again!

Sincerely,
Jason Henry
Cascade Metal Designs LLC
http://www.customdxffiles.com
Image
prattswelding
2 Star Member
2 Star Member
Posts: 86
Joined: Wed Jun 15, 2011 2:07 pm

Re: Cool Bear Scene to share!

Post by prattswelding »

Truly great work Jason. I made my cut using a Plasma Cam Samson Table with a Thermal Dynamics Cutmaster 52. I didn't have to tweak or resize your file at all. It was ready to cut at approx 18" x 24" on the Plasma Cam software. Here's a pic of the finished project. Thanks for the file and keep up the good work.


Image
User avatar
FreeDXF.com
2.5 Star Member
2.5 Star Member
Posts: 145
Joined: Mon Mar 23, 2009 11:49 am

Re: Cool Bear Scene to share!

Post by FreeDXF.com »

Thanks for sharing the cut design work. Every cut system is unique and the results will vary with each one. Glad the files worked well for you. It appears you put some sort of finish on cut design work. Can you share what type of finish that is? JH
Image
prattswelding
2 Star Member
2 Star Member
Posts: 86
Joined: Wed Jun 15, 2011 2:07 pm

Re: Cool Bear Scene to share!

Post by prattswelding »

Believe it or not Jason, that finish came out of a can. It's the Rustoleum 2 in 1 Metallic Paint/Primer. It's around $8.00 a can and leaves a pretty smooth looking finish. This was the first piece I painted with it and I was quite suprised with how it came out.
User avatar
FreeDXF.com
2.5 Star Member
2.5 Star Member
Posts: 145
Joined: Mon Mar 23, 2009 11:49 am

Re: Cool Bear Scene to share!

Post by FreeDXF.com »

Thanks for sharing the finish that was used. Rustoleum definently makes some nice products that leave great finishes. JH
Image
User avatar
hdfaster
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 501
Joined: Thu Jan 07, 2010 11:38 pm

Re: Cool Bear Scene to share!

Post by hdfaster »

Very nice Jason, thank you.
redfarm
2 Star Member
2 Star Member
Posts: 61
Joined: Mon Aug 09, 2010 10:51 pm

Re: Cool Bear Scene to share!

Post by redfarm »

When I first got my machine the previous owner had it set up to leave tabs, like Jason said it was a software setting that needed to be changed. Another problem that I had is the DXF to G-code converter will leave small unjoined segments that cause similar issues, also can be minimized with adjusting the settings but this issue will nearly drive you to drinking. I would like to upgrade this software in the future.
BILLYC
1.5 Star Member
1.5 Star Member
Posts: 33
Joined: Sat Dec 25, 2010 10:55 pm

Re: Cool Bear Scene to share!

Post by BILLYC »

that might be true but i have problems polyline,spline drawings
lines , and arcs. drawings i have no problems with
hawkeyeillusions
1 Star Member
1 Star Member
Posts: 16
Joined: Tue Aug 02, 2011 4:37 pm

Re: Cool Bear Scene to share!

Post by hawkeyeillusions »

Hows this
hawkeyeillusions
1 Star Member
1 Star Member
Posts: 16
Joined: Tue Aug 02, 2011 4:37 pm

Re: Cool Bear Scene to share!

Post by hawkeyeillusions »

how bout now

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

hawkeyeillusions
1 Star Member
1 Star Member
Posts: 16
Joined: Tue Aug 02, 2011 4:37 pm

Re: Cool Bear Scene to share!

Post by hawkeyeillusions »

again

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
FreeDXF.com
2.5 Star Member
2.5 Star Member
Posts: 145
Joined: Mon Mar 23, 2009 11:49 am

Re: Cool Bear Scene to share!

Post by FreeDXF.com »

Looks Great! I like the green =)
Image
7mile
1 Star Member
1 Star Member
Posts: 22
Joined: Tue Dec 07, 2010 9:37 pm
Location: Oregon

Re: Cool Bear Scene to share!

Post by 7mile »

Thanks for the file heres the one I cut and heat colored. What would you guys get for this I still have no clue on pricing and lots of people like this. Thanks again.
Bill
bear scene.JPG

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Eagle Mtn Metal Works
3 Star Member
3 Star Member
Posts: 497
Joined: Sun Sep 12, 2010 11:18 pm
Location: AZ

Re: Cool Bear Scene to share!

Post by Eagle Mtn Metal Works »

Hey Bill-- love the coloring. It's fun to do the finishing with a torch. I just started and love it. :D
Rod S in AZ
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”