Cowboy and Cowgirl
-
- 1.5 Star Member
- Posts: 34
- Joined: Fri Aug 13, 2010 2:49 am
- Location: Phoenix, AZ
Cowboy and Cowgirl
I am hoping someone can help me out. I am looking for a cowboy and cowgirl arm and arm walking into the sunset. It can be as simple as a silhoutte. I dont have much time here. I am running out of resources...lol....Help me please....Thanks in advance
- pony
- 2.5 Star Member
- Posts: 173
- Joined: Mon Oct 25, 2010 8:47 pm
- Location: DFW area,TX, USA
Re: Cowboy and Cowgirl
OK, first the warning. Its just a collection of clipart pieced together then converted to vector graphics.
I have never CNC cut a piece of metal in my life, I'm still awaiting delivery of my Torchmate table.
It may need more work. Use at your own risk.
Let me know how you get on. I like practicing with other peoples metal/money
I have never CNC cut a piece of metal in my life, I'm still awaiting delivery of my Torchmate table.
It may need more work. Use at your own risk.
Let me know how you get on. I like practicing with other peoples metal/money
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Platt Mfg
- 2 Star Member
- Posts: 65
- Joined: Sat Sep 25, 2010 1:51 pm
- Location: Las vegas
Re: Cowboy and Cowgirl
pony this is a first for me nothing shows up when i open you file was going to check it out but it wont show up
- pony
- 2.5 Star Member
- Posts: 173
- Joined: Mon Oct 25, 2010 8:47 pm
- Location: DFW area,TX, USA
Re: Cowboy and Cowgirl
I exported the previous DXF from Illustrator. I'm using a Mac, so maybe its a Mac DXF format issue
Here is the Adobe Illustrator version,
Here is the Adobe Illustrator version,
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- pony
- 2.5 Star Member
- Posts: 173
- Joined: Mon Oct 25, 2010 8:47 pm
- Location: DFW area,TX, USA
Re: Cowboy and Cowgirl
and a JPEG
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2647
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Cowboy and Cowgirl
Here is the DXF done with another program, hope it works for you. It's a great looking file, I hope to cut it soon.
Larry
Larry
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Chopper John
- 3 Star Elite Contributing Member
- Posts: 387
- Joined: Mon Aug 24, 2009 10:22 pm
- Location: Crystal Lake, IL
- Contact:
Re: Cowboy and Cowgirl
...
Last edited by Chopper John on Wed Dec 21, 2011 1:34 am, edited 1 time in total.
Chopper John
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
-
- 1.5 Star Member
- Posts: 34
- Joined: Fri Aug 13, 2010 2:49 am
- Location: Phoenix, AZ
Re: Cowboy and Cowgirl
Awesome...thank you everyone who contributed to this...It should turn out really good...I will cut it out tomorrow..Thanks again
-
- 2.5 Star Elite Contributing Member
- Posts: 239
- Joined: Sun May 16, 2010 3:28 am
Re: Cowboy and Cowgirl
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Patrick
-
- 2.5 Star Member
- Posts: 123
- Joined: Wed Jun 01, 2016 5:57 pm
Re: Cowboy and Cowgirl
Thanks for sharing...
Best Regards,
Mike Volpone
MJV Graphics
CorelDraw X7
SolidWorks 2014
Coming soon: ShopSabre SideKick 8 w/ 6" Pipe Attachment
and HyperTherm 105
Mike Volpone
MJV Graphics
CorelDraw X7
SolidWorks 2014
Coming soon: ShopSabre SideKick 8 w/ 6" Pipe Attachment
and HyperTherm 105