Red Fish or Red Drum

Post by **saighusa** » Tue Jun 26, 2018 8:46 am

Here is a Red Fish or Red Drum. I used a patina and clear coat on this fish.

KAP Red Fish 2D.dxf

KAP Red Fish 2.pcm

Post by **plasmanewbie** » Tue Jun 26, 2018 9:29 am

Awesome! Thank you

Post by **ggeh** » Tue Jun 26, 2018 5:22 pm

Great job it looks real thanks for the sharing

Post by **acourtjester** » Tue Jun 26, 2018 5:45 pm

Ok question did you use a scribe to mark the mouth, gills, and some of the scales on the fish. as the white behind does not show through?

Nice looking fish

larrycameron44 · Post by **larrycameron44** » Wed Jun 27, 2018 4:30 am

acourtjester wrote:Ok question did you use a scribe to mark the mouth, gills, and some of the scales on the fish. as the white behind does not show through?
Nice looking fish

It looks just like a single kerf cut. From slight angle you won’t see through.
Larry Cameron
RusticMetalArt

Post by **acourtjester** » Wed Jun 27, 2018 7:58 am

Thanks Larry still not convinced

You may be correct, but after studying the image it appears the picture was taken straight on.
Look carefully and you can make out a dress and legs reflected from the picture taker

Maybe saighusa will solve the question

Post by **saighusa** » Wed Jun 27, 2018 3:17 pm

The mouth, gills, scales, fish are all cut using a fine cut nozzle. Sorry about the slow reply. I get a .037 kerf using it.

Post by **saighusa** » Wed Jun 27, 2018 4:14 pm

Forgot to add; you can see on the pcm or dxf these are cut paths. Thanks.

Post by **acourtjester** » Wed Jun 27, 2018 4:48 pm

Thanks for the reply

end of story

Bigjoe · Post by **Bigjoe** » Sun Jul 29, 2018 8:34 am

very nice, my favorite fish

kgc1031 · Post by **kgc1031** » Sun Jul 29, 2018 12:36 pm

Love the patina color! I airbrushed mine and the color was more orange. I couldn't find the copper transparent color. I will have to keep in mind of patina. Great Job!

RedFish IMG_E7471[1].jpg

jallenmoore09 · Post by **jallenmoore09** » Thu May 02, 2019 11:17 am

thanks!!! looks great!!

jlb8748 · Post by **jlb8748** » Mon Jul 08, 2019 7:43 am

For some reason when I load this into Command CNC I see all the code but not the fish, and when I press run nothing happens. This is the only file it's happened to me with. Any ideas? It loads into plasmacan fine, I set all my layers and operations like any other file. No idea what's going on.

david jordan · Post by **david jordan** » Tue Jul 09, 2019 7:26 am

Nice job, thank you.

odha · Post by **odha** » Wed Jul 10, 2019 5:19 pm

Thank you for the share - the red fish looks great!

Red Fish or Red Drum

Red Fish or Red Drum

Re: Red Fish or Red Drum

Re: Red Fish or Red Drum

Re: Red Fish or Red Drum

Re: Red Fish or Red Drum

Re: Red Fish or Red Drum

Re: Red Fish or Red Drum

Re: Red Fish or Red Drum

Re: Red Fish or Red Drum

Re: Red Fish or Red Drum

Re: Red Fish or Red Drum

Re: Red Fish or Red Drum

Re: Red Fish or Red Drum

Re: Red Fish or Red Drum

Re: Red Fish or Red Drum