skidsteer window saver

[ggeh]

I'm going to be cutting some alders and brush with my skidsteer and I was concerned about my window getting broke from flying debris. So this is what I came up with for a kubota svl90-2. I put ¼ inch lexan behind the screen/rock guard. Hopefully that will stop every thing that the brush hog throws at me. I cut it out of 12gage steel 1.5 squares and 1 inch 14 gage square tubing for the frame. The brackets at the top of the sheetcam pic. have bend lines in them for 90deg bends and probably will only fit a svl90.

IMG_1844[1].JPG

IMG_1859[1].JPG

skidsteer window screen with holes and brk.dxf

[weldguy]

Looks great, nice job and thanks for sharing!

[AIRFLOWKID]

Thanks