Arrow of Light
-
- 2.5 Star Elite Contributing Member
- Posts: 197
- Joined: Tue Jan 11, 2011 4:09 pm
- Location: Payson, Utah
Arrow of Light
Anybody create anything for an Arrow of Light award in metal? I may be putting something together here over the next few days, but I would sure like to see anything anybody may have created for this award (Webelos scouts)
----------------------------------------
ColdCreekWorks.com
ColdCreekWorks.com
-
- 4 Star Elite Contributing Member
- Posts: 996
- Joined: Thu Nov 21, 2013 5:32 pm
Re: Arrow of Light
here is the award in dxf....you could add a name attached to top or bottom or leave as is..never been cut but looks clean
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Arrow of Light
Great file Harry. I may donate a few of these for pack at church.
Thanks again Harry
Rick
Thanks again Harry
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 2.5 Star Member
- Posts: 133
- Joined: Tue Dec 08, 2015 1:06 am
- Location: St. George, Utah
Re: Arrow of Light
I used the original design, and gave my boys some options - most liked a modified version.
Cut them out of 1/4" stock, great look.
Cut them out of 1/4" stock, great look.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
5x10 ArcLight Dynamics Plasma table
http://www.thesteelyardinc.net
http://www.thesteelyardinc.net
-
- 2.5 Star Elite Contributing Member
- Posts: 197
- Joined: Tue Jan 11, 2011 4:09 pm
- Location: Payson, Utah
Re: Arrow of Light
Do you have pictures of the final product? I wouldn't mind seeing that too.
----------------------------------------
ColdCreekWorks.com
ColdCreekWorks.com
-
- 2.5 Star Elite Contributing Member
- Posts: 197
- Joined: Tue Jan 11, 2011 4:09 pm
- Location: Payson, Utah
Re: Arrow of Light
Thank you everybody. Here is what I ended up with
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
----------------------------------------
ColdCreekWorks.com
ColdCreekWorks.com
-
- 2.5 Star Elite Contributing Member
- Posts: 197
- Joined: Tue Jan 11, 2011 4:09 pm
- Location: Payson, Utah
Re: Arrow of Light
See attached. You will have to modify the names and the back plate to your liking, but it shouldn't be hard.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
----------------------------------------
ColdCreekWorks.com
ColdCreekWorks.com
-
- 1.5 Star Member
- Posts: 31
- Joined: Sun May 15, 2016 1:14 am
- Location: Sarnia Ont
Re: Arrow of Light
Just watched your video this am. lol they look good.
-
- 1.5 Star Member
- Posts: 27
- Joined: Wed May 28, 2014 10:43 pm
Re: Arrow of Light
Thanks for the file! It looks like I will be cutting these out for my son's pack.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Elite Contributing Member
- Posts: 197
- Joined: Tue Jan 11, 2011 4:09 pm
- Location: Payson, Utah
Re: Arrow of Light
Here is my build video in case you wanted to look at it:
https://www.youtube.com/watch?v=rfqi1PvJiv8
https://www.youtube.com/watch?v=rfqi1PvJiv8
----------------------------------------
ColdCreekWorks.com
ColdCreekWorks.com