Wrench Holders

Post by **oldironrep** » Wed Nov 29, 2017 2:05 pm

Wrench Holder for wall or tool cart. Took and changed files from here. Thanks. It cut OK in 16Ga. but the 4's in 3/4" & 1/4" were a little thin. Maybe widen them a little.

Wrench Holder.dxf

Wrench holder Metric.dxf

Proballz03 · Post by **Proballz03** » Wed Nov 29, 2017 2:18 pm

something used for the shop, always is good. Thanks for sharing!

krymis · Post by **krymis** » Thu Nov 30, 2017 10:12 am

can't get the first one to open. the second one saved fine. Thanks for the share

Dugan · Post by **Dugan** » Thu Nov 30, 2017 10:39 am

Yea first one doesnt work, metric does however.

AIRFLOWKID · Post by **AIRFLOWKID** » Thu Nov 30, 2017 8:07 pm

Thanks

Post by **oldironrep** » Thu Nov 30, 2017 8:11 pm

I fixed the bad file.

Post by **Zippo** » Fri Dec 01, 2017 2:12 am

Thanks for posting...

krymis · Post by **krymis** » Fri Dec 01, 2017 9:05 am

file worked great. thank you and good job.

Faulknerm · Post by **Faulknerm** » Thu Dec 07, 2017 12:27 pm

thanks for posting. I may use these.
You should really consider adding them to the garage organization thread

dustyscustomwelding · Sat Dec 23, 2017 12:05 pm

Nice way to adapt the file. Stuff like this is the reason I bought my table.

RTD Fab · Post by **RTD Fab** » Sat May 05, 2018 3:01 pm

Could someone let me know the original size for me to check against import?

Thanks

Post by **david jordan** » Mon May 07, 2018 7:55 am

Thank you.

Post by **RONWB** » Wed May 16, 2018 2:24 pm

I need that thanks

Post by **Buckmaster1967** » Sat Mar 09, 2019 11:07 pm

Love to have these, but can't get either to open on Inkscape.

xring · Post by **xring** » Sun Mar 10, 2019 10:44 am

oldironrep wrote: ↑Wed Nov 29, 2017 2:05 pm Wrench Holder for wall or tool cart. Took and changed files from here. Thanks. It cut OK in 16Ga. but the 4's in 3/4" & 1/4" were a little thin. Maybe widen them a little.
...
Wrench Holder.dxf
Wrench holder Metric.dxf

NIce, thanks for the share.

Is that an Allis G in the background??

Bill

Post by **oldironrep** » Sun Mar 10, 2019 1:25 pm

Good eye Bill. First tractor I ever drove(not on purpose. My dad really tanned my backside). I have 4 of them. I make and sell implements for them. You have a G?

Jeff

xring · Post by **xring** » Sun Mar 10, 2019 4:01 pm

oldironrep wrote: ↑Sun Mar 10, 2019 1:25 pm Good eye Bill. First tractor I ever drove(not on purpose. My dad really tanned my backside). I have 4 of them. I make and sell implements for them. You have a G?

Jeff

My Dad had one for years, he loved it. We sold it after he passed away. Tough decision, but I like to see old iron go to somebody that will enjoy it.
I still have my Granddad's '47 Farmall A in the basement.
Thanks,
Bill

Post by **oldironrep** » Sun Mar 10, 2019 5:10 pm

An A in the basement? I have an A also, not sure the year but no hydraulics. The prize is my Grandfathers first tractor....a 1939 Caterpillar R2.
Take care,
Jeff

xring · Post by **xring** » Sun Mar 10, 2019 7:11 pm

Yes, I believe 48 was the first year for the Super A, with hydraulics. Mine used to have the exhaust powered lift.
Never seen an old Caterpillar. That would be neat.
Bill

Kentuckyfarmer · Post by **Kentuckyfarmer** » Sun Mar 10, 2019 7:28 pm

thanks

Post by **oldironrep** » Tue Mar 12, 2019 11:41 am

DSCN0482.JPG

KerryJ · Post by **KerryJ** » Sun Mar 17, 2019 2:18 am

thanks

Wrench Holders

Wrench Holders

Re: Wrench Holers

Re: Wrench Holers

Re: Wrench Holers

Re: Wrench Holers

Re: Wrench Holers

Re: Wrench Holers

Re: Wrench Holers

Re: Wrench Holers

Re: Wrench Holers

Re: Wrench Holders

Re: Wrench Holders

Re: Wrench Holders

Re: Wrench Holders

Re: Wrench Holders

Re: Wrench Holders

Re: Wrench Holders

Re: Wrench Holders

Re: Wrench Holders

Re: Wrench Holders

Re: Wrench Holders

Re: Wrench Holders