Help with Artwork

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
jlundry
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Fri Sep 06, 2013 4:13 pm

Help with Artwork

Post by jlundry »

Is there anyone who could help me convert these two images into a dxf file that is ready to cut? We are trying to implement these new logos for our school and my superintendent is wanting some metal made out of these designs.

Thanks.

Image
FairviewHS_Initial.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

BanksAg
2.5 Star Member
2.5 Star Member
Posts: 171
Joined: Fri Nov 18, 2016 5:13 pm

Re: Help with Artwork

Post by BanksAg »

They probably need some clean-up, but here's a start. These were vectorized in Inkscape, and as many on here have recommended, Inkscape is a good, free, easy to learn software for things like vectorizing files; it's what I have my kids use for vectorizing images (and it's free so it fits in the school budget).

Also, if you're integrating a new logo, you might check with your super to see if they already have vector files. We just went through the process of changing our school's logo, and my principal had a set of pdf files of the new logo that he was able to give me. They were a lot higher quality than what we were able to get off of vectorizing images.

Image
PS Hornet.dxf
PS Hornet.svg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Tim Eggleston
Banks High School
Banks, OR

Arc Pro 4800
PowerMax 45XP
Mach 3, SheetCam
Inkscape, Rhino 3D
jlundry
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Fri Sep 06, 2013 4:13 pm

Re: Help with Artwork

Post by jlundry »

Thank you for your help.
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”