It is currently Tue Nov 21, 2017 10:51 am

 

Ryan PT-22 Plane

DXF Art Sharing Forum is for sharing dxf, plt, or any other vector file for plasma cutting. Browse what others have posted or post some DXF art files of your own.
bafortin
Posts: 41
Joined: Thu Aug 07, 2014 4:31 pm

Ryan PT-22 Plane

Postby bafortin » Thu Nov 09, 2017 2:32 pm

The gentleman who owns the plane in the picture, as well as the pilot has asked me to do a cutout of his plane so he can put it on the gate at his property. I have tried to get it to load up and convert to a DXF on my plasmacam table as well as tried to convert it in inkscape. I am having no luck. I have attached a jpeg of the plane. Can someone on this site convert the plane to a DXF for me? I am willing to pay for it. Thanks.
Boyd Fortin

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1302
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Ryan PT-22 Plane

Postby little blue choo » Thu Nov 09, 2017 9:09 pm

Sorry it flew the coop!

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

bafortin
Posts: 41
Joined: Thu Aug 07, 2014 4:31 pm

Re: Ryan PT-22 Plane

Postby bafortin » Thu Nov 09, 2017 9:20 pm

I think the file I too large. I am working on trying to optimize the picture. I will try to download it if I can get it optimized. Thanks

Boyd Fortin

bafortin
Posts: 41
Joined: Thu Aug 07, 2014 4:31 pm

Re: Ryan PT-22 Plane

Postby bafortin » Thu Nov 09, 2017 9:39 pm

I will try it again with a new thread later.

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1302
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Ryan PT-22 Plane

Postby little blue choo » Thu Nov 09, 2017 11:39 pm

I'm sure someone will help you when you get it loaded. The PT-22 was a good old trainer.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

Larry83301
Elite Contributing Member
Elite Contributing Member
Posts: 1753
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Ryan PT-22 Plane

Postby Larry83301 » Fri Nov 10, 2017 11:20 am

bafortin wrote:I think the file I too large. I am working on trying to optimize the picture. I will try to download it if I can get it optimized. Thanks

Boyd Fortin


Load your picture into PAINT and use the RESIZE to make the PG smaller. :D


Larry

bafortin
Posts: 41
Joined: Thu Aug 07, 2014 4:31 pm

Re: Ryan PT-22 Plane

Postby bafortin » Fri Nov 10, 2017 2:03 pm

Ok, I was finally able to figure out how to resize the picture so I can add the file in the thread. Below is a picture of the plane that I need help converting to a DXF. As I said above, I am willing to pay someone to convert it to a DXF. Thanks.
Boyd

Image

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 2795
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Ryan PT-22 Plane

Postby acourtjester » Fri Nov 10, 2017 2:25 pm

Looks like the one Harrison Ford played golf with :oops:
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

icmplasma85
Elite Contributing Member
Elite Contributing Member
Posts: 252
Joined: Wed Nov 07, 2012 11:24 am
Location: Virginia

Re: Ryan PT-22 Plane

Postby icmplasma85 » Fri Nov 10, 2017 8:49 pm

This came together nicely.

Image

Ryan PT 22 plane.dxf


Can someone explain how to make the image of the file come up on the screen as well? Thought "place inline" would work but it doesn't seem to. Either way, hope this file is what you were looking for.

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

PlasmaCam DHC2
Hypertherm Powermax 65
Millermatic 211 MIG Welder

User avatar
larrycameron44
Elite Contributing Member
Elite Contributing Member
Posts: 525
Joined: Sun Oct 31, 2010 4:12 pm
Location: Auckland New Zealand

Re: Ryan PT-22 Plane

Postby larrycameron44 » Fri Nov 10, 2017 9:10 pm

icmplasma85 wrote:This came together nicely.

Ryan PT 22 plane.dxf


Can someone explain how to make the image of the file come up on the screen as well? Thought "place inline" would work but it doesn't seem to. Either way, hope this file is what you were looking for.


icmplasma85
I just take a screenshot of the dxf when onscreen using the windows inbuilt “snipping” tool.

Cheers
Larry Cameron
RusticMetalArt

icmplasma85
Elite Contributing Member
Elite Contributing Member
Posts: 252
Joined: Wed Nov 07, 2012 11:24 am
Location: Virginia

Re: Ryan PT-22 Plane

Postby icmplasma85 » Fri Nov 10, 2017 9:15 pm

ohhhhhh

The K.I.S.S method. It makes sense I was trying to make it more complicated than need be .. Thanks Larry
PlasmaCam DHC2
Hypertherm Powermax 65
Millermatic 211 MIG Welder

bafortin
Posts: 41
Joined: Thu Aug 07, 2014 4:31 pm

Re: Ryan PT-22 Plane

Postby bafortin » Mon Nov 13, 2017 9:05 pm

icmplasma85, this is awesome. That's for the conversion. Once I cut it Ii will post a picture of it. Thanks again.

Boyd Fortin

icmplasma85
Elite Contributing Member
Elite Contributing Member
Posts: 252
Joined: Wed Nov 07, 2012 11:24 am
Location: Virginia

Re: Ryan PT-22 Plane

Postby icmplasma85 » Mon Nov 13, 2017 10:29 pm

No problem. And btw, use this file if you haven't already cut this. I bridged a few extra things to make it more solid. Forgot to repost it the other day. The first one should be fine but better safe than sorry. Enjoy.

Image

Ryan PT 22 plane.dxf

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

PlasmaCam DHC2
Hypertherm Powermax 65
Millermatic 211 MIG Welder

bafortin
Posts: 41
Joined: Thu Aug 07, 2014 4:31 pm

Re: Ryan PT-22 Plane

Postby bafortin » Wed Nov 15, 2017 8:48 am

I have not cut it yet, so I will download this copy. I will probably will cut it next week since he and his wife are wanting some other things as well. I will post a picture after I cut it. Thanks again.
Boyd Fortin


Return to “DXF Art - DXF Clip Art File Sharing Forum”

Who is online

Users browsing this forum: FitzgeraldFab, Google Adsense [Bot], JesseB, Larry83301, Paint Chip and 22 guests