Not cut ready!
I didn't size and space this file. You will need to set it to your desired cut size and adjust the spacing on it.
As always...
DXF and SVG in zipped folder along with the picture proof.
Please post a picture if you cut it.
~Julie
Scarecrow, Wizard of Oz
-
RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Scarecrow, Wizard of Oz
The Scarecrow from the Wizard of Oz.
Not cut ready!
I didn't size and space this file. You will need to set it to your desired cut size and adjust the spacing on it.
As always...
DXF and SVG in zipped folder along with the picture proof.
Please post a picture if you cut it.
~Julie
Not cut ready!
I didn't size and space this file. You will need to set it to your desired cut size and adjust the spacing on it.
As always...
DXF and SVG in zipped folder along with the picture proof.
Please post a picture if you cut it.
~Julie
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
Larry83301
- 5 Star Elite Contributing Member
- Posts: 2646
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Scarecrow, Wizard of Oz
Looks GREAT, thanks for sharing!
Larry
Larry
-
lazybear
- 2.5 Star Member
- Posts: 161
- Joined: Tue Jun 06, 2017 3:49 pm
- Location: Crystal Lake, IL
Re: Scarecrow, Wizard of Oz
My boyfriend is going to love this one! He's a huge wizard of oz fan. Thanks!
-
mikemurray
- 1.5 Star Member
- Posts: 33
- Joined: Tue Jan 06, 2015 3:20 pm
- Location: SE Ma
Re: Scarecrow, Wizard of Oz
Thanks Again for another Nice File!
Homemade 5x10 watertable
Hypertherm Powermax 65 w/ Ohmic and machine torch and Proma THC
Solidworks, Inkscape, Draftsight Sheetcam, Mach 3
Hypertherm Powermax 65 w/ Ohmic and machine torch and Proma THC
Solidworks, Inkscape, Draftsight Sheetcam, Mach 3
-
abcofab
- 2.5 Star Elite Contributing Member
- Posts: 166
- Joined: Thu Jun 16, 2011 9:19 am
- Location: Marshfield, MA.
- Contact:
Re: Scarecrow, Wizard of Oz
Than youi, NIce file, check out the photo gallery where I posted a laser engraved rendition on 1/4 in clear acrylic
Omax 80X Waterjet 6 x 12 with Tilt-A-Jet
CamFive 150w Co2 Laser
Miller Mig & Tig
Whitney-Jenson 20 ton Punch Press
Atlas Lathe
CamFive 150w Co2 Laser
Miller Mig & Tig
Whitney-Jenson 20 ton Punch Press
Atlas Lathe
-
RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Re: Scarecrow, Wizard of Oz
Thank you for the compliments! If you guys are interested I can work on finishing the set... Tinman, Lion, and Dorothy. I will hold them for ransoms until someone posts a picture of the Scarecrow cut though. lol. I'm evil like that.
