It is currently Thu Oct 19, 2017 6:49 am

 

Always something to be thankful for/ Grateful thankful blessed

DXF Art Sharing Forum is for sharing dxf, plt, or any other vector file for plasma cutting. Browse what others have posted or post some DXF art files of your own.
lucky7sg
Elite Contributing Member
Elite Contributing Member
Posts: 77
Joined: Sat May 02, 2015 12:38 pm
Contact:

Always something to be thankful for/ Grateful thankful blessed

Postby lucky7sg » Tue Sep 19, 2017 7:19 pm

Tis the season to be thankful.... Here are two of my favourites

I cut this one five feet long and they sell like crazy. Nice for over a bay window or something like that. As always check before you cut. It cuts nicely for me most of the time but sometimes when I load it the ends of some of the scrolls flatten. A Corel Draw and my machine glitch I believe.

The grateful thankful blessed cuts nicely about 36" or bigger. Both cut out of 14 gauge.
Image
Image
Always something to be thankful for EDITED.cdr

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 2767
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby acourtjester » Tue Sep 19, 2017 7:53 pm

Please sir can I have it in DXF or SVG :D
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

lucky7sg
Elite Contributing Member
Elite Contributing Member
Posts: 77
Joined: Sat May 02, 2015 12:38 pm
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby lucky7sg » Tue Sep 19, 2017 9:21 pm

At the moment the dxf file is too large to upload. Will try and shrink it down and then I will post. :)

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 2767
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby acourtjester » Wed Sep 20, 2017 8:08 am

You can put them into a ZIP file and post that (Winrar is a free ZIP file maker) :D :D
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

Maadman
Posts: 185
Joined: Wed Apr 01, 2015 10:30 pm
Location: Watkins, Iowa
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby Maadman » Wed Sep 20, 2017 9:23 am

Both those files are BEAUTIFUL!!!! I too would love them in DXF. Thank you for your share.

plasmanewbie
Posts: 156
Joined: Thu Jul 24, 2008 11:15 am
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby plasmanewbie » Wed Sep 20, 2017 9:54 am

Thanks for the awesome share! Here they are converted to dxf for those without Corel. Had to do in 2 individual dxf files, too big all in 1.
Thankful.dxf

Thankful2.dxf

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Not so "newbie" anymore!

bwgsmith
Posts: 551
Joined: Tue May 25, 2010 11:42 am
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby bwgsmith » Thu Sep 21, 2017 12:28 pm

Thanks for sharing.

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 2767
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby acourtjester » Thu Sep 21, 2017 12:37 pm

Thanks for the conversion :D
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

krymis
Posts: 38
Joined: Tue Aug 22, 2017 9:59 am
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby krymis » Thu Sep 21, 2017 12:41 pm

I cut it last night on a plasmacam 4x4 table. I will go back and do some fine tuning but the file cut as is.
21908626_1880953111919978_177524708_o.jpg

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


lucky7sg
Elite Contributing Member
Elite Contributing Member
Posts: 77
Joined: Sat May 02, 2015 12:38 pm
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby lucky7sg » Fri Sep 22, 2017 4:55 pm

Thanks for posting the dxf. I hadn't had time to get to it. Appreciate the help

User avatar
Gamelord
Elite Contributing Member
Elite Contributing Member
Posts: 1548
Joined: Wed Aug 29, 2012 5:17 pm
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby Gamelord » Fri Sep 22, 2017 11:03 pm

Thank you for the share, that is very nice.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."

Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD

iron2
Posts: 58
Joined: Fri Oct 31, 2014 2:04 pm
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby iron2 » Sat Sep 23, 2017 10:59 am

very nice thanks
Homebuilt 2x4 water table
Torchmatecad
Flashcut THC
Hypotherm 45

VPT
Posts: 89
Joined: Wed Apr 24, 2013 8:12 am
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby VPT » Sat Sep 23, 2017 8:39 pm

Thank you!

grindergary
Elite Contributing Member
Elite Contributing Member
Posts: 608
Joined: Sat Aug 25, 2012 8:08 pm
Location: Edmonton, Alberta Canada
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby grindergary » Sun Sep 24, 2017 9:04 am

Very nice file,
Thank you

Gary
4x8 Home made with Precision Plasma LLC. Gantry
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel DrawX6, V Carve Pro
Miller CTS 280 Miller Mig

burns cnc art
Posts: 100
Joined: Sun Feb 14, 2016 10:08 am
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby burns cnc art » Tue Sep 26, 2017 11:07 am

awesome ! Thanks
Hypertherm Powermax 85
Candcnc Electronics
Mach3
SheetcamTNG
Aspire

jhsenterprises
Posts: 10
Joined: Fri Mar 03, 2017 4:33 pm
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby jhsenterprises » Fri Oct 06, 2017 1:56 pm

Any chance you can post these files as svgs? I want to clean them up a bit for sheet cam and give them a try. Really like the design by the way. I'll turn around and post up the cleanup versions when I'm done..... Thank you

phillipd
Posts: 9
Joined: Fri Jul 14, 2017 9:42 pm
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby phillipd » Fri Oct 06, 2017 10:37 pm

very nice, thanks

Zeke
Posts: 78
Joined: Sun Jul 26, 2009 11:42 pm
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby Zeke » Sat Oct 07, 2017 9:19 pm

Thanks

motoguy
Posts: 907
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA
Contact:

Re: Always something to be thankful for/ Grateful thankful blessed

Postby motoguy » Sat Oct 07, 2017 9:40 pm

jhsenterprises wrote:Any chance you can post these files as svgs? I want to clean them up a bit for sheet cam and give them a try. Really like the design by the way. I'll turn around and post up the cleanup versions when I'm done..... Thank you


Here you go.

Always something to be thankful for EDITED.svg

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam


Return to “DXF Art - DXF Clip Art File Sharing Forum”

Who is online

Users browsing this forum: Bing [Bot] and 16 guests