First file share
-
- 2 Star Member
- Posts: 63
- Joined: Tue Aug 22, 2017 9:59 am
First file share
Here is a 32x16.5" 2nd amendment flag that I worked on this week. Cut it out and all was good with the design just cut path needed reordered. I reordered it in design edge. Attached is the dxf and pcm files.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 63
- Joined: Tue Aug 22, 2017 9:59 am
Re: First file share
here is a picture
-
- 5 Star Elite Contributing Member
- Posts: 2607
- Joined: Thu Jul 24, 2008 11:15 am
Re: First file share
Thanks for the share, love the design! Can anyone convert this to dxf or svg?
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1167
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: First file share
Chris, these are all cut paths or I'd convert to DXF for folks
Did you save the drawn paths before converting to cut path? If so, make a file of just that closed/open path drawing and then choose export as a DXF. Many folks here don't have PlasmaCam but can use the drawing saved as a DXF in their respective CAM programs to run their machines.
Did you save the drawn paths before converting to cut path? If so, make a file of just that closed/open path drawing and then choose export as a DXF. Many folks here don't have PlasmaCam but can use the drawing saved as a DXF in their respective CAM programs to run their machines.
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
-
- 2 Star Member
- Posts: 63
- Joined: Tue Aug 22, 2017 9:59 am
Re: First file share
i have it i have to zip it.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1167
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: First file share
Here's the file cleaned up and regular closed/open paths.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
-
- 2 Star Member
- Posts: 63
- Joined: Tue Aug 22, 2017 9:59 am
Re: First file share
Thank you sir, as always you are a great asset.
-
- 2.5 Star Member
- Posts: 112
- Joined: Wed Oct 07, 2015 4:33 pm
Re: First file share
Thank you!
-
- 1.5 Star Elite Contributing Member
- Posts: 39
- Joined: Wed Jul 08, 2015 9:42 am
Re: First file share
That is awesome!!!! Great Share!! Thank you!!
-
- 3 Star Elite Contributing Member
- Posts: 287
- Joined: Wed Aug 27, 2014 12:03 pm
- Location: Shiner
Re: First file share
Thanks for the great file.
Samson 5x10
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
-
- 1 Star Member
- Posts: 10
- Joined: Fri Jul 14, 2017 9:42 pm
Re: First file share
Very nice, thank you
-
- 2.5 Star Member
- Posts: 102
- Joined: Fri Mar 28, 2014 10:00 pm
Re: First file share
Lovely! Thank you for sharing!
-
- 1/2 Star Member
- Posts: 3
- Joined: Mon Apr 23, 2012 9:37 am
Re: First file share
is that a regular font I could find on the WEB? or were the letters get gapped, put a break in them so they would not fall out, "O" "A" ect. would like to know the name of font. Nice Design
-
- 1 Star Member
- Posts: 19
- Joined: Tue Oct 10, 2017 7:25 pm
Re: First file share
awesome file! Thanks for sharing!
-
- 1.5 Star Elite Contributing Member
- Posts: 25
- Joined: Sat Apr 04, 2020 3:51 pm
Re: First file share
Great looking piece. thanks.
- ETCWeld
- 3 Star Member
- Posts: 257
- Joined: Sat Dec 16, 2017 10:45 pm
Re: First file share
Thank you for sharing this file!
and thanks for this too