I took the wood saw from the weekly share - bear cub wood saw scene and added a few ducks and i added the hunter & dog dxf (took out most details to fit inside saw) posted by jim to take place of the bear cub scene. I am still new to drawing in CAD so there isn't as much detail as there could be but it's a start
Wood saw duck scene
-
- 1/2 Star Member
- Posts: 2
- Joined: Fri Aug 18, 2017 7:03 am
Wood saw duck scene
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 5 Star Elite Contributing Member
- Posts: 2607
- Joined: Thu Jul 24, 2008 11:15 am
Re: Wood saw duck scene
Right on! Great first post an combination of shares. Thanks varigg!
-
- 3 Star Member
- Posts: 285
- Joined: Sun Dec 08, 2013 9:05 pm
Re: Wood saw duck scene
This is really cool. thanks for share with us!
PlasmaRoute "DO NOT BUY there Plasma table from this company NO Support"
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Wood saw duck scene
GREAT first post virigg! keep up the good work. You may be new to drawing in cad but you did a fine job and will continue to improve with practice. Thanks for the share.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 2.5 Star Member
- Posts: 105
- Joined: Wed Jun 01, 2016 1:53 pm
Re: Wood saw duck scene
good job thanks
-
- 3.5 Star Elite Contributing Member
- Posts: 628
- Joined: Fri Jan 16, 2009 10:26 pm
Re: Wood saw duck scene
Very nice. Thanks for sharing
-
- 2.5 Star Member
- Posts: 126
- Joined: Wed Apr 24, 2013 8:12 am
Re: Wood saw duck scene
Very nice! Thanks
- hdfaster
- 3.5 Star Elite Contributing Member
- Posts: 501
- Joined: Thu Jan 07, 2010 11:38 pm
Re: Wood saw duck scene
Real nice, thank you.
- larrycameron44
- 3.5 Star Member
- Posts: 579
- Joined: Sun Oct 31, 2010 4:12 pm
- Location: Auckland New Zealand
Re: Wood saw duck scene
Hi welcome and thanks for the post. I am not trying to be picky, but if you look at the bullrush stems they are by my cal approx .8mm wide.varigg wrote:I took the wood saw from the weekly share - bear cub wood saw scene and added a few ducks and i added the hunter & dog dxf (took out most details to fit inside saw) posted by jim to take place of the bear cub scene. I am still new to drawing in CAD so there isn't as much detail as there could be but it's a start
I wouldn't and most others wouldn't try and cut that with plasma as it is just too thin. I or we or some of us try to make parts like this 3mm or more wide.
This message is intended just for your future drawing considerations.
But thank you once again. great post and welcome to the greatest plasma forum on the net!
Larry Cameron