Horseplay pop up
- John Frantum
- 2.5 Star Member
- Posts: 156
- Joined: Fri Apr 01, 2016 6:42 am
Horseplay pop up
It's been a while since I've shared, but I thought some of you could use this, or parts of it.
I made it about half this size, out of 16 ga. crs, of course it was cut on a laser, so I scaled this up a bit, to about 38.75 wide for plasma.
The narrowest points are about .093 wide, but you might want to scope it out to make sure there are no points that will burn out.
I would recommend at least 14 ga. at this size.
When hand forming, be careful to take it a little at a time, otherwise the features might collide.
I'll try to post a picture of the finished product so you can see the forming sequence.
I made it about half this size, out of 16 ga. crs, of course it was cut on a laser, so I scaled this up a bit, to about 38.75 wide for plasma.
The narrowest points are about .093 wide, but you might want to scope it out to make sure there are no points that will burn out.
I would recommend at least 14 ga. at this size.
When hand forming, be careful to take it a little at a time, otherwise the features might collide.
I'll try to post a picture of the finished product so you can see the forming sequence.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3 Star Member
- Posts: 376
- Joined: Thu May 28, 2015 8:02 am
- Location: Merritt island fl.
Re: Horseplay pop up
thank very nice job
-
- 1 Star Member
- Posts: 11
- Joined: Mon Jul 10, 2017 9:03 pm
Re: Horseplay pop up
thanks I do like the 3D effect nice
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Horseplay pop up
Great file John. I love the 3D effect. Thanks for sharing.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 3 Star Member
- Posts: 268
- Joined: Tue Feb 07, 2012 1:46 am
- Location: Australia
- Contact:
Re: Horseplay pop up
Thanks for sharing John
Peter
Peter
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: Horseplay pop up
Very nice share!!
Can someone convert to older cdr for me? Corel4 didn't like the dxf I extracted so took into inkscape to convert but didn't work so well for me.. Thanks
Can someone convert to older cdr for me? Corel4 didn't like the dxf I extracted so took into inkscape to convert but didn't work so well for me.. Thanks
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics
-
- 3 Star Member
- Posts: 296
- Joined: Wed Apr 01, 2015 10:30 pm
- Location: Watkins, Iowa
Re: Horseplay pop up
Love this, thank you!
-
- 2.5 Star Member
- Posts: 171
- Joined: Fri Nov 18, 2016 5:13 pm
Re: Horseplay pop up
Thanks! This is really cool.
Tim Eggleston
Banks High School
Banks, OR
Arc Pro 4800
PowerMax 45XP
Mach 3, SheetCam
Inkscape, Rhino 3D
Banks High School
Banks, OR
Arc Pro 4800
PowerMax 45XP
Mach 3, SheetCam
Inkscape, Rhino 3D
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Horseplay pop up
That's a great idea, nice work!
Thanks for the share
Thanks for the share
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
-
- 2.5 Star Elite Contributing Member
- Posts: 239
- Joined: Sun May 16, 2010 3:28 am
-
- 1 Star Member
- Posts: 13
- Joined: Mon Mar 05, 2012 4:01 pm
Re: Horseplay pop up
Very nice!
-
- 2.5 Star Member
- Posts: 102
- Joined: Fri Mar 28, 2014 10:00 pm
Re: Horseplay pop up
Beautiful work, thank you for sharing
-
- 2.5 Star Member
- Posts: 119
- Joined: Sun Feb 14, 2016 10:08 am
- trtilton61
- 2 Star Member
- Posts: 63
- Joined: Mon Jul 15, 2013 4:45 pm
Re: Horseplay pop up
Very nice design,thanks.
Precision Plasma HDSE-4x8
CandCNC Bladerunner dragon cut
Hypertherm 65
Mach3
sheetcam
CandCNC Bladerunner dragon cut
Hypertherm 65
Mach3
sheetcam