Monopoly Guy

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
Econdron
1.5 Star Member
1.5 Star Member
Posts: 48
Joined: Thu Jun 08, 2017 7:10 pm

Monopoly Guy

Post by Econdron »

Did this one for a customer. There's a duplicate line in there somewhere SheetCAM keeps saying it's taking out, but I can't find it. Should still cut fine though. Approximately 23" W x 16" H
Image
Monopoly.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
otisa2007
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 458
Joined: Thu Apr 04, 2013 6:59 pm
Location: mt pleasant texas
Contact:

Re: Monopoly Guy

Post by otisa2007 »

nice thanks for the share
Largemouthlou
4 Star Member
4 Star Member
Posts: 1402
Joined: Mon Aug 30, 2010 5:56 am
Location: Palm Bch Gardens Fl
Contact:

Re: Monopoly Guy

Post by Largemouthlou »

That's a blast from the past for me!! LOL Nice and thanks for the share
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
User avatar
lazybear
2.5 Star Member
2.5 Star Member
Posts: 161
Joined: Tue Jun 06, 2017 3:49 pm
Location: Crystal Lake, IL

Re: Monopoly Guy

Post by lazybear »

So cool! Thanks for the share!
Econdron
1.5 Star Member
1.5 Star Member
Posts: 48
Joined: Thu Jun 08, 2017 7:10 pm

Re: Monopoly Guy

Post by Econdron »

Thought I'd attach a picture of the final product. It's a set of table legs, obviously only one is pictured. Piece of glass slides inside that opening on the top, then some plastic bolts are threaded into that bottom bar to hold the glass and legs in place.
IMG_40951.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

gsi
2 Star Member
2 Star Member
Posts: 67
Joined: Sat Jul 18, 2015 2:56 pm
Location: Huntsville, AL
Contact:

Re: Monopoly Guy

Post by gsi »

That turned out really cool. Thanks for the share. I already cut out two of them myself.
User avatar
MetalheadRK
3 Star Member
3 Star Member
Posts: 300
Joined: Fri Mar 23, 2012 4:44 pm

Re: Monopoly Guy

Post by MetalheadRK »

This is awesome! Thank you for the share.
4x4 PlasmaCam
Hypertherm 45
Eastwood 175 MIG welder
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”