Holder is about 12" / 305 mm wide and takes an 11" reel
A very simple Cable or Rope Reel Holder
-
AndrewMawson
- 2 Star Member
- Posts: 54
- Joined: Tue Jan 17, 2017 3:54 pm
A very simple Cable or Rope Reel Holder
I made this this morning before breakfast to solve a problem holding a 500 metre roll of 6 mm polypropylene rope that I'm using as duct draw wires in a Tractor Shed I'm putting up
Holder is about 12" / 305 mm wide and takes an 11" reel
Holder is about 12" / 305 mm wide and takes an 11" reel
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
4x4 DIY Plasma Table
Hypertherm PM45
Purelogic THC
Mach3
Sheetcam
Inkscape
Hypertherm PM45
Purelogic THC
Mach3
Sheetcam
Inkscape
-
little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: A very simple Cable or Rope Reel Holder
Nothing like being able to solve your own problems. GOT TO LOVE IT!
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
Vanquish
- 2 Star Member
- Posts: 77
- Joined: Mon Jan 02, 2017 7:09 am
Re: A very simple Cable or Rope Reel Holder
What thickness did you use?
-
AndrewMawson
- 2 Star Member
- Posts: 54
- Joined: Tue Jan 17, 2017 3:54 pm
Re: A very simple Cable or Rope Reel Holder
2 mm Zintec sheet as it was on the CNC Table at the time. Worked out very adequately stout 
4x4 DIY Plasma Table
Hypertherm PM45
Purelogic THC
Mach3
Sheetcam
Inkscape
Hypertherm PM45
Purelogic THC
Mach3
Sheetcam
Inkscape
-
shinertx
- 3 Star Elite Contributing Member
- Posts: 288
- Joined: Wed Aug 27, 2014 12:03 pm
- Location: Shiner
Re: A very simple Cable or Rope Reel Holder
very nice thanks.
Samson 5x10
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
