USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
rickjamesbish
2 Star Member
2 Star Member
Posts: 68
Joined: Sun Oct 30, 2016 8:46 pm

USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by rickjamesbish »

Completed this a while back using an anchor image from here as the base to start with. This is two layer, 5 piece, painted candy Gold and Blue and finished with 2k Clear. Held together by Super Magnets. This was presented at his retirement and went over quite well. Hopefully someone will be able to convert this to DXF in case anyone needs it. I ran into no issues in Design Edge but it seems that converting to DXF results in some anomalies.
USNMemorial.pcm
Image
Image

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by little blue choo »

Looks Great

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
User avatar
Specialkfab
1.5 Star Member
1.5 Star Member
Posts: 28
Joined: Fri Jan 27, 2017 10:20 pm
Location: Hawthorne, Nevada

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by Specialkfab »

How do the magnets work. Do you orientate the pieces then apply the magnets on the back to hold together?
DHC2 PlasmaCam 4X4
Pipe Attachment
HyperTherm 45XP
rickjamesbish
2 Star Member
2 Star Member
Posts: 68
Joined: Sun Oct 30, 2016 8:46 pm

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by rickjamesbish »

They work great. I just throw them on strategically. Like on this one I placed them on back of the ring with lettering and the USN and then assemble. No glue or anything like that however I have used JB Weld on one side of some larger pieces so magnets stay in place on one piece. Hold piece and give it a bump to make sure it holds. Add more as needed. I use this on most all layered pieces so client can take apart for dusting, shipping , storage, etc. No complaints so far.
james.davis
4 Star Member
4 Star Member
Posts: 1009
Joined: Mon May 21, 2012 3:58 pm
Location: spanaway wa.

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by james.davis »


You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by acourtjester »

Nice work my daughter retired 2015 a chief.
I checked out the conversion to DXF and there are 2 lines for everything :cry:
double layers.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
bigworm36
2 Star Member
2 Star Member
Posts: 51
Joined: Sat Nov 12, 2016 10:06 am

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by bigworm36 »

Looks awesome I like the magnet idea, I have been welding on threaded studs, where do you get your magnets from?
Arclight 5x5 table
Delta 3 CandCNC controller
Hypertherm PM 85
Linux computer
Solid edge 3D
SheetCam
Inkscape
Millermatic 211
www.ceeplasma.com
rickjamesbish
2 Star Member
2 Star Member
Posts: 68
Joined: Sun Oct 30, 2016 8:46 pm

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by rickjamesbish »

bigworm36 wrote:Looks awesome I like the magnet idea, I have been welding on threaded studs, where do you get your magnets from?
Amazon. Not that expensive considering the time it saves. I have not shopped around so likely can get better deal.
rickjamesbish
2 Star Member
2 Star Member
Posts: 68
Joined: Sun Oct 30, 2016 8:46 pm

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by rickjamesbish »

acourtjester wrote:Nice work my daughter retired 2015 a chief.
I checked out the conversion to DXF and there are 2 lines for everything :cry:
double layers.jpg
Yeah someone else converted a flag I did and weird stuff happened. Maybe I should post it without the design edge cut paths.
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by acourtjester »

I would like that it may make a difference with the double lines
Thanks
Tom
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
rickjamesbish
2 Star Member
2 Star Member
Posts: 68
Joined: Sun Oct 30, 2016 8:46 pm

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by rickjamesbish »

acourtjester wrote:I would like that it may make a difference with the double lines
Thanks
Tom
This is prior to converting to cut paths so it should show up as just single set of lines with no lead ins unless the software your using automatically converts it to a cut path.
USNCommerative.pcm

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by acourtjester »

Thanks but I use either DXF or SVG file formats maybe someone here can convert PCM to one of those :)
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
User avatar
Specialkfab
1.5 Star Member
1.5 Star Member
Posts: 28
Joined: Fri Jan 27, 2017 10:20 pm
Location: Hawthorne, Nevada

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by Specialkfab »

acourtjester wrote:Nice work my daughter retired 2015 a chief.
I checked out the conversion to DXF and there are 2 lines for everything :cry:
double layers.jpg
Looks like James converted it to DXF with the cut lines for a Plasmacam applied.
DHC2 PlasmaCam 4X4
Pipe Attachment
HyperTherm 45XP
doublesix
1 Star Member
1 Star Member
Posts: 10
Joined: Sun Jan 29, 2017 12:04 am

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by doublesix »

That is beautiful I am going to have to look into magnets great idea.
JesseB
1/2 Star Member
1/2 Star Member
Posts: 8
Joined: Thu Jan 03, 2013 10:34 pm

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by JesseB »

Very nice. Would like to make one for my Dad. What is the font used?
rickjamesbish
2 Star Member
2 Star Member
Posts: 68
Joined: Sun Oct 30, 2016 8:46 pm

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by rickjamesbish »

JesseB wrote:Very nice. Would like to make one for my Dad. What is the font used?
Don't recall and will need to look when I get home. I had to break apart fonts as needed to prevent fall outs. It as not a ready cut font.
JesseB
1/2 Star Member
1/2 Star Member
Posts: 8
Joined: Thu Jan 03, 2013 10:34 pm

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by JesseB »

rickjamesbish wrote:
JesseB wrote:Very nice. Would like to make one for my Dad. What is the font used?
Don't recall and will need to look when I get home. I had to break apart fonts as needed to prevent fall outs. It as not a ready cut font.

Thanks, Showed it to my Dad he really likes it. He's looking forward to getting one.
dholt87
2.5 Star Member
2.5 Star Member
Posts: 101
Joined: Thu Apr 16, 2015 9:04 am

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by dholt87 »

Thank you for the file, your work is amazing!
Russ K
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 365
Joined: Sun Dec 13, 2009 8:59 pm
Location: Tacoma, Wa.

Re: USN 2 layer 5 piece Commerative / Memorial with Candy Finish

Post by Russ K »

Converted to DXF without double lines.
USNCommerative.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”