needing some help with a roof logo
-
- 1.5 Star Member
- Posts: 30
- Joined: Wed Mar 22, 2017 7:32 pm
needing some help with a roof logo
this is a buddy business and he wife wants me to cut this for him for fathers day. I'm still new at this and needing some help.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7784
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: needing some help with a roof logo
Here are 3 different ways to do it. You can cut out the parts and attach them to a background, or cut the parts out of a single sheet.
I attached the smaller roof parts with bridges to have them stay in. Or you can cut all the parts and layer them.
have fun
I attached the smaller roof parts with bridges to have them stay in. Or you can cut all the parts and layer them.
have fun
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Last edited by acourtjester on Tue Jun 13, 2017 11:23 am, edited 1 time in total.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 2.5 Star Member
- Posts: 101
- Joined: Sun Aug 18, 2013 8:47 pm
Re: needing some help with a roof logo
You've got two choices- cut the blue pieces our as positives and attach them to a backer, or cut the blue as negatives, leaving the white solid. The second option will be easier than getting a bunch of individual letters to all line up on the backer, but you'll have to create tables on the R's and O's, as well as on the white sections inside the roof, to keep them from dropping out.
-
- 1.5 Star Member
- Posts: 30
- Joined: Wed Mar 22, 2017 7:32 pm
Re: needing some help with a roof logo
Wow, great !! thanks so much. Ill play around with it. Greatly appreciate it !!!
-
- 1.5 Star Member
- Posts: 30
- Joined: Wed Mar 22, 2017 7:32 pm
Re: needing some help with a roof logo
having problems converting to dxf file. Any ideas ? Thanks
-
- 1.5 Star Member
- Posts: 30
- Joined: Wed Mar 22, 2017 7:32 pm
Re: needing some help with a roof logo
NOT SURE HOW TO CHANGE SVG TO DXF ??
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7784
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: needing some help with a roof logo
Well if you had Inkscape, or QCAD both free and I'm sure others you open the SVG file and save it as a DXF file.
Or say which one you want to use some one will convert it for you, And you will find sometimes using SVG is better then DXF.
Or say which one you want to use some one will convert it for you, And you will find sometimes using SVG is better then DXF.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1.5 Star Member
- Posts: 30
- Joined: Wed Mar 22, 2017 7:32 pm
Re: needing some help with a roof logo
thanks for the info. I cant open SVG so I guess I will need to down load Inkscape or QCAD and figure out how to convert. Thanks again.
-
- 1.5 Star Member
- Posts: 30
- Joined: Wed Mar 22, 2017 7:32 pm
Re: needing some help with a roof logo
I got it. downloaded Inkscape. Thanks