Giving Back: Part 4 of 7

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
User avatar
messerbrian
1 Star Member
1 Star Member
Posts: 18
Joined: Mon Nov 07, 2016 10:57 am
Location: Georgia, U.S.A.
Contact:

Giving Back: Part 4 of 7

Post by messerbrian »

Next is one not all will able to utilize, because I have only done the states surrounding Georgia, with the exception a couple odds and ends. Could spark some good ideas though, these are great sellers!
Image
Image
Image
Image
STATES.zip

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Messer EdgeMax 5'x10' with Hypertherm MaxPro200 plasma and air scribe attachment

Drawing/drafting done with CorelDraw X8 and Messer OmniWin '16
smwsolutions
1 Star Member
1 Star Member
Posts: 17
Joined: Thu Dec 01, 2016 10:47 am

Re: Giving Back: Part 4 of 7

Post by smwsolutions »

Thanks for sharing.
VPT
2.5 Star Member
2.5 Star Member
Posts: 126
Joined: Wed Apr 24, 2013 8:12 am

Re: Giving Back: Part 4 of 7

Post by VPT »

Thank you!
greggomc
2 Star Member
2 Star Member
Posts: 85
Joined: Sat May 23, 2009 11:41 pm

Re: Giving Back: Part 4 of 7

Post by greggomc »

Thanks
PWAERO
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Fri Aug 07, 2015 12:36 pm

Re: Giving Back: Part 4 of 7

Post by PWAERO »

Thanks
jbailey
1.5 Star Member
1.5 Star Member
Posts: 40
Joined: Tue Mar 03, 2015 11:46 am

Re: Giving Back: Part 4 of 7

Post by jbailey »

Thanks for the share, what kind of finish do you use?
User avatar
messerbrian
1 Star Member
1 Star Member
Posts: 18
Joined: Mon Nov 07, 2016 10:57 am
Location: Georgia, U.S.A.
Contact:

Re: Giving Back: Part 4 of 7

Post by messerbrian »

jbailey wrote:Thanks for the share, what kind of finish do you use?
We offer 4 finishes, Copper, Torch f/x, Rust, and a "Marble" Finish (which is our handmade copper patina sprayed on the piece and then heated with a blow torch)
Messer EdgeMax 5'x10' with Hypertherm MaxPro200 plasma and air scribe attachment

Drawing/drafting done with CorelDraw X8 and Messer OmniWin '16
jbailey
1.5 Star Member
1.5 Star Member
Posts: 40
Joined: Tue Mar 03, 2015 11:46 am

Re: Giving Back: Part 4 of 7

Post by jbailey »

Love the finishes, thanks!
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”