Deck panels

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
slamwilson
1 Star Elite Contributing Member
1 Star Elite Contributing Member
Posts: 16
Joined: Wed Apr 18, 2018 4:45 pm

Re: Deck panels

Post by slamwilson »

Nice work, What did you use for fasteners?
deanwerden
1 Star Member
1 Star Member
Posts: 14
Joined: Sat Mar 24, 2018 9:25 pm

Re: Deck panels

Post by deanwerden »

Thank to the OP for posting these. I resized and added tabs for mounting they look great and get lots of compliments. Trying to figure out how to attach pictures
deanwerden
1 Star Member
1 Star Member
Posts: 14
Joined: Sat Mar 24, 2018 9:25 pm

Re: Deck panels

Post by deanwerden »

whiskeymike
3 Star Member
3 Star Member
Posts: 345
Joined: Mon Feb 23, 2015 5:23 pm
Location: Austin, TX

Re: Deck panels

Post by whiskeymike »

Looks great. Did you use a particular method for the patterns? Thinking that an illustrator brush might work for doing this.
badassr1
2 Star Member
2 Star Member
Posts: 52
Joined: Thu Apr 07, 2016 6:16 pm

Re: Deck panels

Post by badassr1 »

what thickness did you use and how strong do they feel ?
zoeconner
2.5 Star Member
2.5 Star Member
Posts: 106
Joined: Sun Aug 21, 2011 12:41 pm

Re: Deck panels

Post by zoeconner »

Wow Deanwerden!!! Geat job. Im doing 2 more porches now. I used 12ga and had no problems. This one has more supports than mine so I know it's not going anywhere.
deanwerden
1 Star Member
1 Star Member
Posts: 14
Joined: Sat Mar 24, 2018 9:25 pm

Re: Deck panels

Post by deanwerden »

badassr1 wrote:what thickness did you use and how strong do they feel ?
I used 11 gauge and they are not flimsy at all
deanwerden
1 Star Member
1 Star Member
Posts: 14
Joined: Sat Mar 24, 2018 9:25 pm

Re: Deck panels

Post by deanwerden »

zoeconner wrote:Wow Deanwerden!!! Geat job. Im doing 2 more porches now. I used 12ga and had no problems. This one has more supports than mine so I know it's not going anywhere.
Thanks again for posting the files
ifallswelder
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 61
Joined: Fri Oct 21, 2011 10:37 pm

Re: Deck panels

Post by ifallswelder »

Here is my backyard fence panel. I made it out of a type of stainless that will eventually rust (409?). It has been up for about four years and looks pretty cool now.
wholefence.dxf
FencePanel.dxf
fence project32.jpg
fence project31.jpg
fence project24.jpg
fence project23.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

kirkfradley
1 Star Member
1 Star Member
Posts: 17
Joined: Fri Mar 16, 2018 12:45 pm

Re: Deck panels

Post by kirkfradley »

thanks look great.
zoeconner
2.5 Star Member
2.5 Star Member
Posts: 106
Joined: Sun Aug 21, 2011 12:41 pm

Re: Deck panels

Post by zoeconner »

Here is another small one I did.
20180919_181123.jpg
20180919_181106.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2553
Joined: Thu Jul 24, 2008 11:15 am

Re: Deck panels

Post by plasmanewbie »

Beautiful job! Such a great thread.
bigcreek
3 Star Member
3 Star Member
Posts: 313
Joined: Tue Jul 28, 2009 11:23 pm
Location: Weiser, ID
Contact:

Re: Deck panels

Post by bigcreek »

Very very nicely done!
zoeconner
2.5 Star Member
2.5 Star Member
Posts: 106
Joined: Sun Aug 21, 2011 12:41 pm

Re: Deck panels

Post by zoeconner »

Here you go
Benda.pcm

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Vanquish
2 Star Member
2 Star Member
Posts: 77
Joined: Mon Jan 02, 2017 7:09 am

Re: Deck panels

Post by Vanquish »

Thanks so much.
innovateiowa
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Tue Oct 30, 2018 7:27 am

Re: Deck panels

Post by innovateiowa »

Those look great!
towno
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Fri Sep 14, 2018 4:49 pm

Re: Deck panels

Post by towno »

hi everyone i cannot get these to open in inkscape ...the dxf opens in sheetcam and shows all the panel styles , but im at a loss as to how to get it to open in inkscape so i can choose 1 panel and reshape it .. any thoughts ?
User avatar
david jordan
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 671
Joined: Sun Jul 06, 2014 2:21 pm

Re: Deck panels

Post by david jordan »

Thank you.
PlasmaCam DHC 2 4 X 4 table
Powermax 65
400amp mig welder with dc tig
CRP Bench Top Pro
CS 6,Aspire,Mach 3
Bridgeport
Wells Index mill
10K X 42" Southbend, 6K collets
16" Sothbend, 5C collets
16" Hendy lathe
Everlast Tig200 Amp
PL1220
MIFab
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 255
Joined: Tue Apr 16, 2013 8:47 pm

Re: Deck panels

Post by MIFab »

Awesome work! Anyone do mixed tree clumps?
weldthis
1 Star Member
1 Star Member
Posts: 10
Joined: Wed Dec 16, 2009 1:19 am
Location: Pueblo Colorado

Re: Deck panels

Post by weldthis »

very nice, thank you
patrog
1.5 Star Member
1.5 Star Member
Posts: 28
Joined: Sat Dec 09, 2017 10:09 am

Re: Deck panels

Post by patrog »

Thank you so much for those files and ideas for deck rails. We are getting ready to build a new deck in the front yard and think that we will use these. They are awesome!
endoverend47
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Sun May 14, 2017 4:32 am

Re: Deck panels

Post by endoverend47 »

Awesome thank you!
jerirl
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Sat May 18, 2019 9:22 am

Re: Deck panels

Post by jerirl »

Mother of god, thats beautiful
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”