Maple Syrup
-
Paint Chip
- 2.5 Star Member
- Posts: 108
- Joined: Tue Oct 30, 2012 7:43 pm
Maple Syrup
Hi Folks, I made this for a friend of mine. Still a tenderfoot at all of this but I thought I'd post this anyway in case anyone can use it, or parts of it. More to come as I get the hang of it.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
PPLLC 4X8 table w 620 ox steppers on 5 axes
Bladerunner CandCNC w/DTHC II
Hypertherm PM85
Bladerunner CandCNC w/DTHC II
Hypertherm PM85
-
little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Maple Syrup
Thanks for the share Paint Chip. Will be looking for the more to come. LOL
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
Larry83301
- 5 Star Elite Contributing Member
- Posts: 2647
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Maple Syrup
A very nice starting point, my first ones were not even close to that good! 
Larry
Larry
-
harrymorley
- 4 Star Elite Contributing Member
- Posts: 996
- Joined: Thu Nov 21, 2013 5:32 pm
Re: Maple Syrup
Good job....thanks for the share
-
john3@jpwcompanies.com
- 1/2 Star Member
- Posts: 8
- Joined: Sat Mar 11, 2017 11:32 am
Re: Maple Syrup
Awesome!
