Help with text cutout, please!

[livetooextreme]

Hi All,
I'm doing a simple rectangle sign with the saying below for a friend. Problem is, I'm not so good at text. I'm using a plasmacam but I only have the older software and it stinks at text. I would definitely appreciate any help from the expert folks on here that could probably make this a quick breeze.

"ISU Alumni –
Forever making occupational therapy powerful, widely recognized, science-driven and evidence based.
-Donated by the Centennial Class of 2017"

The number of lines doesn't matter. Just whatever looks good. Open to any font recommendations, too. Sign dimensions will be approximately 2.5 feet wide by 1.5 feet tall - or whatever size needed to make it easy enough to cut (without being too large). 12 guage HR. I'm using HT PowerMax 45 on a plascam 4x4 hc2. Kerf is apprx 0.045".

Thanks in advance!

[Old Iron]

See if this will work

ISU Alumni.svg

[Cz_apie]

Fixed the class- just convert to cut lines

ISU Alumni.pcm

[livetooextreme]

This looks great! Thank you so much! Anyway you can put this in a format for the older Plasmacam 3.11 software? The new DesignEdge PCM files don't work with the older version. Or DXF would work, too.

Fixed the class- just convert to cut lines

ISU Alumni.pcm

[Old Iron]

Fixed the class- just convert to cut lines

ISU Alumni.pcm

I read through the spelling 4 times and still didn't catch the class

[Cz_apie]

This looks great! Thank you so much! Anyway you can put this in a format for the older Plasmacam 3.11 software? The new DesignEdge PCM files don't work with the older version. Or DXF would work, too.

Fixed the class- just convert to cut lines

ISU Alumni.pcm

Herewith DXF file as requested in compressed ZIP format - open Zip and extract dxf

ISU Alumni fixed older PCM.zip

[livetooextreme]

This looks great! Thank you so much! Anyway you can put this in a format for the older Plasmacam 3.11 software? The new DesignEdge PCM files don't work with the older version. Or DXF would work, too.

Fixed the class- just convert to cut lines

ISU Alumni.pcm

Herewith DXF file as requested in compressed ZIP format - open Zip and extract dxf

ISU Alumni fixed older PCM.zip

Thank you much! Definitely appreciate the help.

[Cz_apie]

I read through the spelling 4 times and still didn't catch the class

That is one of the privelages of growing older, we are allowed to make such mistakes