Old Mic and Music notes

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
Hillbilly Stills
2 Star Member
2 Star Member
Posts: 52
Joined: Mon Jun 06, 2016 2:58 pm

Old Mic and Music notes

Post by Hillbilly Stills »

I put this together for a customer . Hope someone can use it.

Image
old Mic Hope.dxf
old Mic Hope Backing.dxf
old Mic Hope 1L.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Last edited by Hillbilly Stills on Mon May 08, 2017 4:34 pm, edited 3 times in total.
TruCut 5x10
Victor Plasma
Thermal Dynamics
Sheet Cam
Rhino3d
Bobcad
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2647
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Old Mic and Music notes

Post by Larry83301 »

Thanks for sharing and especially posting the picture.


Larry
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1169
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: Old Mic and Music notes

Post by rdj357 »

Nice work, thanks for sharing!!
Old Iron
3.5 Star Member
3.5 Star Member
Posts: 681
Joined: Wed Nov 26, 2014 5:12 pm

Re: Old Mic and Music notes

Post by Old Iron »

Thanks for sharing.
Great looking work
BAR M
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 448
Joined: Thu Jul 11, 2013 8:46 pm
Location: NEW MEXICO

Re: Old Mic and Music notes

Post by BAR M »

Thank you, can't wait to give it to a singing buddy.
lklassen331
2.5 Star Member
2.5 Star Member
Posts: 199
Joined: Mon Dec 08, 2014 4:33 pm
Location: Gentry, AR
Contact:

Re: Old Mic and Music notes

Post by lklassen331 »

Nice, thanks...!
5x10 Dynatorch High Definition plasma table. Cuttingshop drawing program. Sigmanest nesting program. Custom fabrication and powder coating.

Whatsoever thy hand findeth to do, do it with thy might Ecclesiastes 9:10
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Old Mic and Music notes

Post by little blue choo »

Cool looking sign but the mic and music will fall out leaving six straight line cuts and six star cut outs. By cutting the mic separately this could be a very cool layered sign.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Hillbilly Stills
2 Star Member
2 Star Member
Posts: 52
Joined: Mon Jun 06, 2016 2:58 pm

Re: Old Mic and Music notes

Post by Hillbilly Stills »

Yea Rick your right. I will be cutting the mic and music notes separate then layering them on the oval with the lines and stars
I will be posting pics pretty soon. I hope to get to this by the end of the week.
TruCut 5x10
Victor Plasma
Thermal Dynamics
Sheet Cam
Rhino3d
Bobcad
Hillbilly Stills
2 Star Member
2 Star Member
Posts: 52
Joined: Mon Jun 06, 2016 2:58 pm

Re: Old Mic and Music notes

Post by Hillbilly Stills »

I have came back and uploaded the files seperate. The Mic and notes on L1 and the background is backing file.
TruCut 5x10
Victor Plasma
Thermal Dynamics
Sheet Cam
Rhino3d
Bobcad
Hillbilly Stills
2 Star Member
2 Star Member
Posts: 52
Joined: Mon Jun 06, 2016 2:58 pm

Re: Old Mic and Music notes

Post by Hillbilly Stills »

Cut this today.. Cut great. I will post a pic when I finish it.
TruCut 5x10
Victor Plasma
Thermal Dynamics
Sheet Cam
Rhino3d
Bobcad
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Old Mic and Music notes

Post by little blue choo »

Can't wait to see it. I know it will look awesome.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
User avatar
billyeagley
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 359
Joined: Tue Jun 05, 2012 7:11 pm

Re: Old Mic and Music notes

Post by billyeagley »

Very cool! Thanks for sharing!
PlasmaCAM 5x10 (Samson) - DesignEdge - Hypertherm Powermax 65
RONWB
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 370
Joined: Sun Jul 13, 2014 12:49 pm

Re: Old Mic and Music notes

Post by RONWB »

thank cool
Hillbilly Stills
2 Star Member
2 Star Member
Posts: 52
Joined: Mon Jun 06, 2016 2:58 pm

Re: Old Mic and Music notes

Post by Hillbilly Stills »

final pic.. Finished product.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

TruCut 5x10
Victor Plasma
Thermal Dynamics
Sheet Cam
Rhino3d
Bobcad
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”