New! jeep_flipflop_foot_peg

[burntcustoms]

flipflopfootpeg.pcm

[plasmapros]

Can anyone post this as a dxf? Thanks for share!

[MeanWifeDesigns]

Hope this works!

flipflopfootpeg.dxf

[2015cmax]

Here is the file cleaned up without the double lines. I opened it up in SheetCam and it looked ok.

flipflopfootpeg-1.dxf

[Larry83301]

Here is the file cleaned up without the double lines. I opened it up in SheetCam and it looked ok.

I would have included a picture, but do not know how to add one to a post.

Pictures are added the same way as the DXF was added, just be sure the picture is NOT 2 or 3 meg (shrink the picture to less then 100K and it shows p GREAT)! It works best as a JPG around 20K / 50K. Just go to the attachments tab and then find your picture and place it where ever you want on the page.


Larry

[2015cmax]

Thank You Larry. I appreciate the help.

Mike

[burntcustoms]

yea, my software only saves as .pcm (plasmacam design edge). the double lines were the closed path and the cut path. Your file is pretty clean! Thanks for the fix!

[plasmapros]

Thanks for the dxf's and cleanup, cool design!

[thatboystevo]

These are awesome gonna make a set for the wife's jku. Thanks for the share

[Old Iron]

This is what shows up when I open 2015cmax's DXF file.

[burntcustoms]

That's odd. Larry ^^^ cleaned up my file and posted a new one. Did you try that one?

[2015cmax]

I just opened it up again in both SolidEdge and Sheetcam. Loaded fine.
What program are you using?

[Old Iron]

Qcad, burntcustoms opens fine in Qcad
2015cmax I downloaded yours, imported it to Sheetcam and it opened there fine just won't open correctly in Qcad

[burntcustoms]

Awesome! Hope y'all like it!

[2015cmax]

Old iron,
I am not familiar with Qcad. I am wondering if the is an issue with the version type of .dxf. I've heard there are different version of dxf depending on age. Not sure what Solid Edge defaults to. I will have to check when I get home from work. I am still very new at this. That's why I have not post much, I do what to put something up thats full of problems, I am trying to learn using other known working files.

[2015cmax]

Solid Edge 2D only defaults to AutoCAD.dxf. No other choices for save as a .dxf. I noticed that Inkscape will only save as a AutoCADR14 .dxf.

[Old Iron]

THX

[skinnypedaldesigns]

does anyone have a picture of these made would love to see if it is what im looking for