Cut Ready Fonts?

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
User avatar
johnp
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Fri Feb 24, 2017 10:22 am
Contact:

Cut Ready Fonts?

Post by johnp »

Howdy gang. Sorry, I tried searching but "font" and "cut ready" are too common and don't know how else to narrow it down...

I'm wondering if anyone has any collections of fonts that are already cut ready? Would be great if we could get a good collection of them going in a thread for the benefit of all. Unless there is already one somewhere I'm missing...

Thanks!

John
--------------------------------------------
Texas Metal Works
My Toys:
User avatar
johnp
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Fri Feb 24, 2017 10:22 am
Contact:

Re: Cut Ready Fonts?

Post by johnp »

And here is the only cut ready DXF font I have, which I picked up here on the forums...

Image
font.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

--------------------------------------------
Texas Metal Works
My Toys:
User avatar
david jordan
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 671
Joined: Sun Jul 06, 2014 2:21 pm

Re: Cut Ready Fonts?

Post by david jordan »

Thank you.
PlasmaCam DHC 2 4 X 4 table
Powermax 65
400amp mig welder with dc tig
CRP Bench Top Pro
CS 6,Aspire,Mach 3
Bridgeport
Wells Index mill
10K X 42" Southbend, 6K collets
16" Sothbend, 5C collets
16" Hendy lathe
Everlast Tig200 Amp
PL1220
billphillips
2.5 Star Member
2.5 Star Member
Posts: 111
Joined: Tue Oct 22, 2013 2:21 pm
Location: Red Deer , Alberta Canada

Re: Cut Ready Fonts?

Post by billphillips »

thanks for the file
bill
lklassen331
2.5 Star Member
2.5 Star Member
Posts: 199
Joined: Mon Dec 08, 2014 4:33 pm
Location: Gentry, AR
Contact:

Re: Cut Ready Fonts?

Post by lklassen331 »

I've got a tool on my design software that allows me to convert nearly any font to cut lines, and from there it's not hard to make them cut ready. If anyone ever needs a font converted I'd be happy to do it... That probably doesn't help you out any :D But just in case...
5x10 Dynatorch High Definition plasma table. Cuttingshop drawing program. Sigmanest nesting program. Custom fabrication and powder coating.

Whatsoever thy hand findeth to do, do it with thy might Ecclesiastes 9:10
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”