oHHH hELP PLEASE - 1952 Chevrolet 4 Door
- larrycameron44
- 3.5 Star Member
- Posts: 579
- Joined: Sun Oct 31, 2010 4:12 pm
- Location: Auckland New Zealand
oHHH hELP PLEASE - 1952 Chevrolet 4 Door
Hi all, some help if you can please. I am trying to convert the above for a customer dimensions approx 42" x 23" but I cannot get it to look correct, the wheels are all funy and the sun visor is doing my head in and I dont have enough negative space/cut outs etc etc. Any one able to assist?
Now with the added cut hot off the press and again a big thanks to Alan Shirley for the great job in converting the jpg to dxf.
Larry Cameron
NZ
Now with the added cut hot off the press and again a big thanks to Alan Shirley for the great job in converting the jpg to dxf.
Larry Cameron
NZ
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Last edited by larrycameron44 on Tue Jan 31, 2017 7:25 pm, edited 2 times in total.
-
- 2 Star Member
- Posts: 52
- Joined: Wed Sep 09, 2015 6:18 pm
- Location: Tumut NSW Australia
Re: oHHH hELP PLEASE
larrycameron44 wrote:Hi all, some help if you can please. I am trying to convert the above for a customer dimensions approx 42" x 23" but I cannot get it to look correct, the wheels are all funy and the sun visor is doing my head in and I dont have enough negative space/cut outs etc etc. Any one able to assist?
Larry Cameron
NZ
Here you go Larry 42"x24" to keep aspect ratio dxf is in inches took 2 1/2 hours to do, just a sample of what I can do
let me know what you think
Regards from Aus
Alan
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 120
- Joined: Wed Nov 26, 2014 9:13 am
- Location: Portage, WI
Re: oHHH hELP PLEASE
Absolutely spot-on!Alan Shirley wrote: Here you go Larry 42"x24" to keep aspect ratio dxf is in inches took 2 1/2 hours to do, just a sample of what I can do
let me know what you think
Nice work!
Custom LDR Motion Systems 5x10 table w/ rotary axis and scribe
Hypertherm Powermax85
Quincy 325 compressor
Ingersoll Rand D18IN refrigerated air dryer
Millermatic 251 MIG
Everlast PowerPro 256 TIG/stick/plasma w/ water cooler
Hypertherm Powermax85
Quincy 325 compressor
Ingersoll Rand D18IN refrigerated air dryer
Millermatic 251 MIG
Everlast PowerPro 256 TIG/stick/plasma w/ water cooler
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: oHHH hELP PLEASE
Your talent is really showing on this one. Great job Alan. I hope to someday be able to do traces this good.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 2 Star Member
- Posts: 52
- Joined: Wed Sep 09, 2015 6:18 pm
- Location: Tumut NSW Australia
Re: oHHH hELP PLEASE
little blue choo wrote:Your talent is really showing on this one. Great job Alan. I hope to someday be able to do traces this good.
Rick
Thank you
It was all done manually, I don't tend to use the trace function when doing photographs if your after a tip
Regards
Alan
- steel 35
- 3.5 Star Member
- Posts: 634
- Joined: Sun Jan 11, 2015 11:12 am
- Location: N of Cali.
Re: oHHH hELP PLEASE
Incredible! Just as nice as the back seat of these in High school.
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
- larrycameron44
- 3.5 Star Member
- Posts: 579
- Joined: Sun Oct 31, 2010 4:12 pm
- Location: Auckland New Zealand
Re: oHHH hELP PLEASE
Dam Alan, that far exceeds what I believed was possible. Thank you very much I do appreciate it immensely.Diesel wrote:Absolutely spot-on!Alan Shirley wrote: Here you go Larry 42"x24" to keep aspect ratio dxf is in inches took 2 1/2 hours to do, just a sample of what I can do
let me know what you think
Nice work!
Brilliant talent.
I shall call upon your skills in the future with some paid work.
Thank you
Larry Cameron
-
- 2 Star Member
- Posts: 52
- Joined: Wed Sep 09, 2015 6:18 pm
- Location: Tumut NSW Australia
Re: oHHH hELP PLEASE
larrycameron44 wrote:Dam Alan, that far exceeds what I believed was possible. Thank you very much I do appreciate it immensely.Diesel wrote:Absolutely spot-on!Alan Shirley wrote: Here you go Larry 42"x24" to keep aspect ratio dxf is in inches took 2 1/2 hours to do, just a sample of what I can do
let me know what you think
Nice work!
Brilliant talent.
I shall call upon your skills in the future with some paid work.
Thank you
Larry Cameron
No worries Larry
Let me know how it cuts or send a photo of finished job
Alan
-
- 1.5 Star Member
- Posts: 40
- Joined: Tue Mar 03, 2015 11:46 am
Re: oHHH hELP PLEASE
Alan, that is amazing!! Larry, I can't wait to see the finished product. I could only wish to someday be that good.
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: oHHH hELP PLEASE - 1952 Chevrolet 4 Door
Wow Alan. Outstanding. Adding your info to my "list".
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
-
- 2 Star Member
- Posts: 52
- Joined: Wed Sep 09, 2015 6:18 pm
- Location: Tumut NSW Australia
Re: oHHH hELP PLEASE - 1952 Chevrolet 4 Door
motoguy wrote:Wow Alan. Outstanding. Adding your info to my "list".
jbailey wrote:Alan, that is amazing!! Larry, I can't wait to see the finished product. I could only wish to someday be that good.
Thank you it is appreciated, its only practice theres no talent
Practice makes better not perfect
Alan
-
- 2 Star Member
- Posts: 52
- Joined: Wed Sep 09, 2015 6:18 pm
- Location: Tumut NSW Australia
Re: oHHH hELP PLEASE - 1952 Chevrolet 4 Door
[quote="larrycameron44"]Hi all, some help if you can please. I am trying to convert the above for a customer dimensions approx 42" x 23" but I cannot get it to look correct, the wheels are all funy and the sun visor is doing my head in and I dont have enough negative space/cut outs etc etc. Any one able to assist?
Now with the added cut hot off the press and again a big thanks to Alan Shirley for the great job in converting the jpg to dxf.
Larry Cameron
NZ
looks good Larry
Alan
Now with the added cut hot off the press and again a big thanks to Alan Shirley for the great job in converting the jpg to dxf.
Larry Cameron
NZ
looks good Larry
Alan
-
- 3 Star Elite Contributing Member
- Posts: 370
- Joined: Sun Jul 13, 2014 12:49 pm
Re: oHHH hELP PLEASE - 1952 Chevrolet 4 Door
cool car thanks