This is a design I saw in a reprint of Arts and Crafts Period Book on making your own lighting out of cardboard. I have done two different versions one with a back and a lid, and another that is only 3 sides. The one pictured was my interior prototype I did years ago with a cold copper plate and used sheet plastic covered in construction paper.
Arts and Crafts Period Wall Sconce
- Serenityfab
- 1 Star Member
- Posts: 14
- Joined: Tue Dec 02, 2014 4:43 pm
- Location: Bozeman Montana
- Contact:
Arts and Crafts Period Wall Sconce
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Serenity Metalworks
Bozeman, Montana
Plasmacam with homemade vent hood and Penn State dust collector
Hypertherm torch
It's not the size of your shop but what you do with the tools inside!
Bozeman, Montana
Plasmacam with homemade vent hood and Penn State dust collector
Hypertherm torch
It's not the size of your shop but what you do with the tools inside!
- Cz_apie
- 2.5 Star Member
- Posts: 147
- Joined: Sun Sep 04, 2016 2:10 pm
- Location: Thabazimbi South Africa
Re: Arts and Crafts Period Wall Sconce
Thanks for sharing
Deon
Deon
Plasmacam 4x4 DHC2 Table
Design Edge 4.36 Advanced Design
Advanced Height Control
Hypertherm PM 65
Mac Afric Cut 40 Plasma
Mac Afric Mig 195
Mac Afric Tig 200A
Thermax DC 200
Fulgor Butt Welder
13" Metal Lathe-Milling Machine
Rong Fu 25 Mill
Design Edge 4.36 Advanced Design
Advanced Height Control
Hypertherm PM 65
Mac Afric Cut 40 Plasma
Mac Afric Mig 195
Mac Afric Tig 200A
Thermax DC 200
Fulgor Butt Welder
13" Metal Lathe-Milling Machine
Rong Fu 25 Mill
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7784
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Arts and Crafts Period Wall Sconce
Cool thanks for posting
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 3 Star Elite Contributing Member
- Posts: 448
- Joined: Thu Jul 11, 2013 8:46 pm
- Location: NEW MEXICO
Re: Arts and Crafts Period Wall Sconce
Good design. Thank you.
-
- 3 Star Member
- Posts: 296
- Joined: Wed Apr 01, 2015 10:30 pm
- Location: Watkins, Iowa
Re: Arts and Crafts Period Wall Sconce
Very nice! Can you tell me the finish you used on them?
- Serenityfab
- 1 Star Member
- Posts: 14
- Joined: Tue Dec 02, 2014 4:43 pm
- Location: Bozeman Montana
- Contact:
Re: Arts and Crafts Period Wall Sconce
I used Scuplt Neaveau.com patina finishes. Its there cold copper plate finish. Works awesome but only works on Cold Rolled steel.
Also will need to clear coat. Their Permalac Lacquer is an awesome clear coat and is super durable made especially for outdoors.
Also will need to clear coat. Their Permalac Lacquer is an awesome clear coat and is super durable made especially for outdoors.
Serenity Metalworks
Bozeman, Montana
Plasmacam with homemade vent hood and Penn State dust collector
Hypertherm torch
It's not the size of your shop but what you do with the tools inside!
Bozeman, Montana
Plasmacam with homemade vent hood and Penn State dust collector
Hypertherm torch
It's not the size of your shop but what you do with the tools inside!