I am having trouble getting this design to cut without a lot of issues. We are new at this and could use some input. Would anyone be willing to look at this and give input?
Thanks!
Lee Ann
Design Troubles
-
- 1/2 Star Member
- Posts: 4
- Joined: Thu Mar 31, 2016 10:21 am
Design Troubles
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Elite Contributing Member
- Posts: 233
- Joined: Wed Feb 02, 2011 5:15 pm
- Location: Santa Anna Texas
- Contact:
Re: Design Troubles
Here it is connected with Torchmate Cad
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
http://www.PenningtonFab.com
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
-
- 3.5 Star Member
- Posts: 681
- Joined: Wed Nov 26, 2014 5:12 pm
Re: Design Troubles
Nice job aicomp
Irunyon's dxf file would open but, wouldn't show up in my Qcad program
I've had a few over the years that doe this and I don't have a clue why
Irunyon's dxf file would open but, wouldn't show up in my Qcad program
I've had a few over the years that doe this and I don't have a clue why
- Gamelord
- 4.5 Star Member
- Posts: 1637
- Joined: Wed Aug 29, 2012 5:17 pm
- Contact:
Re: Design Troubles
I opened the file up in Corel and it looks good, first glance I can't see any problems and I think it would cut fine. What issues are you having?
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: Design Troubles
Same here, besides lots of nodes 12000 which corel brought down to 5800 looks cutable
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics
-
- 2.5 Star Elite Contributing Member
- Posts: 233
- Joined: Wed Feb 02, 2011 5:15 pm
- Location: Santa Anna Texas
- Contact:
Re: Design Troubles
You're Welcome. Looks great in TM Cad.Old Iron wrote:Nice job aicomp
Irunyon's dxf file would open but, wouldn't show up in my Qcad program
I've had a few over the years that doe this and I don't have a clue why
Mike
http://www.PenningtonFab.com
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
-
- 3 Star Member
- Posts: 329
- Joined: Thu Mar 08, 2012 9:41 am
- Location: Hickson Ontario Canada
- Contact:
Re: Design Troubles
ive done a lot of farm signs just wondering what make of tractor is that ? and not sure but it looks like you may have an issue with the tread on both front and back wheels
Greg From Storiesnsteel
-
- 3 Star Member
- Posts: 329
- Joined: Thu Mar 08, 2012 9:41 am
- Location: Hickson Ontario Canada
- Contact:
Re: Design Troubles
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Greg From Storiesnsteel
-
- 1/2 Star Member
- Posts: 4
- Joined: Thu Mar 31, 2016 10:21 am
Re: Design Troubles
The tractor they are wanting is a Case MX200 and that is what is giving me the most trouble.