4x4 welding table help

nalin400m · Post by **nalin400m** » Sat Feb 04, 2017 2:52 pm

tjenus wrote:Has anyone done his in 1/4 inch ?? thanks KH

I plan on either modifying this or drawing one from scratch for 3/8"

Post by **Davewynes** » Sat Feb 04, 2017 5:56 pm

hemichargersrt8
mate you have shared some awesome work and would like to thankyou

Wheatfarmer · Post by **Wheatfarmer** » Sat Feb 04, 2017 6:51 pm

Awesome work. Thanks! I too plan on modifying this to be able to cut from 1/4".

Gustav129 · Post by **Gustav129** » Sun Feb 05, 2017 3:52 pm

Wow, insane! I like that the clamps are available too. Thanks a bunch.

p_schuck690 · Post by **p_schuck690** » Wed Feb 08, 2017 4:17 pm

a very great idea turned into a great product thanks

Post by **richiemirtsching** » Fri Feb 10, 2017 8:23 am

I have to say thanks for the file I love the new table it is awesome

IMG_1814.JPG

IMG_1815.JPG

IMG_1816.JPG

Cracker Red · Post by **Cracker Red** » Fri Feb 10, 2017 10:05 am

I love my CNC plasma....but have never been successful in cutting dimensional pieces with it...only art stuff. A bit hesitant to cut something like this when the laser already done for you option is already out there....

As for the sharing of the files, that is AWESOME!

Patclem · Post by **Patclem** » Fri Feb 10, 2017 10:50 am

Pretty neat. I'm still building my plasma table, but this would be a fun and useful project. I thought I'd add something about drilling out those holes. That always troubles me when I see that many.

"Hole Enlarging Drill Bit 5/8" http://a.co/1wLOTJ6

McMaster has a whole set: https://www.mcmaster.com/#drill-bit-sets/=16ama62

Without a mag drill, you might have a hard time holding onto a hand drill. Even though, you're just taking a shave.

maxipetrello · Post by **maxipetrello** » Fri Feb 10, 2017 1:54 pm

Very nice work....

Post by **tjenus** » Fri Feb 10, 2017 2:04 pm

richiemirtsching wrote:I have to say thanks for the file I love the new table it is awesome
IMG_1814.JPG
IMG_1815.JPG
IMG_1816.JPG

Great Work

motoguy · Post by **motoguy** » Fri Feb 10, 2017 3:33 pm

richiemirtsching wrote:I have to say thanks for the file I love the new table it is awesome
IMG_1814.JPG
IMG_1815.JPG
IMG_1816.JPG

What thickness material did you use, and did you have to modify the tabs/slots from the drawing for fitment?

Post by **richiemirtsching** » Fri Feb 10, 2017 4:15 pm

3/16 and no mods great file

steel 35 · Post by **steel 35** » Sat Feb 11, 2017 8:53 pm

That looks very nice, finally cut my top today.

Post by **aicomp** » Sat Feb 11, 2017 10:18 pm

Post by **tjenus** » Mon Feb 13, 2017 11:03 am

steel 35 wrote:That looks very nice, finally cut my top today.

Different style? what goes in the Oval Holes?

steel 35 · Post by **steel 35** » Mon Feb 13, 2017 11:32 am

tjenus wrote: Different style? what goes in the Oval Holes?

Down draft table top with a long way to go; Easy access to the holes near the center some won't be accesable & Using the drops for Quarter turn clamp bottoms.

nalin400m · Post by **nalin400m** » Fri Feb 17, 2017 11:04 pm

Here is my test cut toleranced for 3/8". I have not cut a table yet, but the tabs, slots, and holes all fit together well on the test pieces that I did cut.

Bolt hole is .675"
Slot is 1.04" x .415"
Tab is 1" x .375"

Also made them dog bones so that the corners fit easy.

I used 65 amp consumables on my Hypertherm 85 set at 40ipm.

jbright · Post by **jbright** » Sat Feb 18, 2017 2:46 pm

Nice table. Thanks

Faulknerm · Post by **Faulknerm** » Fri Mar 31, 2017 8:36 am

This has to be the best post here! I'll be pm'ing Hemichargersrt8 for a paypal address! These are great files to share! Thank you much!

Faulknerm · Post by **Faulknerm** » Tue Apr 04, 2017 8:06 am

Yesterday I built a fixturing table from 15" wide 3/8 thick channel. I made some upright posts from 4x4 x .250 tubing for a motorcycle frame jig. I've also got some brackets for the kneck tube adjustment. Once I finish it all up I'll make a new post to share.

Post by **acourtjester** » Tue Apr 04, 2017 11:43 am

Here is the 2' X 4' table I have and the clamps I cut from the file here. I welded a hanger rail under the table for clamp storage.

DSCN2501.JPG

DSCN2464.JPG

DSCN2503.JPG

DSCN2502.JPG

DSCN2488.JPG

NWILL · Post by **NWILL** » Wed Apr 05, 2017 3:07 pm

For you guys using your plasma tables, are the holes cutting well enough? Or do you undersize them and use a cobalt drill bit to finish to size?

steel 35 · Post by **steel 35** » Wed Apr 05, 2017 8:00 pm

Mine cut where the thread fit but the shoulder won't that's close enough for me, its hard on drills and make sure (your) hole's fit before cutting something like this.

Faulknerm · Post by **Faulknerm** » Thu Apr 06, 2017 7:59 am

^ what he said

btburn · Post by **btburn** » Sat Apr 08, 2017 12:09 am

hemichargersrt8, I don't know if I'll ever build it but that is some fantastic work

4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help

Re: 4x4 welding table help