20 Can spray bomb wall mount

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
allan101
1.5 Star Member
1.5 Star Member
Posts: 45
Joined: Sat Jun 13, 2015 3:57 pm

20 Can spray bomb wall mount

Post by allan101 »

For spray bomb, mounting is 16 inch on center

Image
PaintCan holder2.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Mcclure3
1/2 Star Member
1/2 Star Member
Posts: 9
Joined: Fri Jun 03, 2016 12:08 pm

Re: 20 Can spray bomb wall mount

Post by Mcclure3 »

Thanks for posting.
sbest1
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 628
Joined: Fri Jan 16, 2009 10:26 pm

Re: 20 Can spray bomb wall mount

Post by sbest1 »

That will come in handy. Thank you
marvelmetalworks
1.5 Star Member
1.5 Star Member
Posts: 48
Joined: Mon Apr 04, 2016 12:01 pm
Location: Chicopee Massachusetts
Contact:

Re: 20 Can spray bomb wall mount

Post by marvelmetalworks »

Thanks for the share !!!
Leon

Plasmacam 4x4
DesignEdge Advanced design software
Advanced height control
Hypertherm 45 xp
Thermal Dynamics Cutmaster42
Miller millermatic 130xp mig
Thermal arc 200 amp tig
User avatar
steel 35
3.5 Star Member
3.5 Star Member
Posts: 634
Joined: Sun Jan 11, 2015 11:12 am
Location: N of Cali.

Re: 20 Can spray bomb wall mount

Post by steel 35 »

IT wont fit in my little HF press brake but I am thinking about it and Hope I can :mrgreen: Thanks
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
Old Iron
3.5 Star Member
3.5 Star Member
Posts: 681
Joined: Wed Nov 26, 2014 5:12 pm

Re: 20 Can spray bomb wall mount

Post by Old Iron »

allan, Thanks for sharing your file.
I took the liberty of modifying your drawing so it can be bent by hand by putting relief cuts in.
Paint can holder.JPG
Paint Can holder 20.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Jeffscott
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Sat Aug 13, 2016 12:19 am

Re: 20 Can spray bomb wall mount

Post by Jeffscott »

thanks this is neet
allan101
1.5 Star Member
1.5 Star Member
Posts: 45
Joined: Sat Jun 13, 2015 3:57 pm

Re: 20 Can spray bomb wall mount

Post by allan101 »

Thanks Old Iron I never thought about that
HaasMetalDesigns
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Mon Mar 18, 2013 4:40 am

Re: 20 Can spray bomb wall mount

Post by HaasMetalDesigns »

I will be making one today for the work truck
JHART02
2 Star Member
2 Star Member
Posts: 71
Joined: Sat Oct 08, 2016 8:10 pm

Re: 20 Can spray bomb wall mount

Post by JHART02 »

Thank you very nice!
User avatar
johnp
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Fri Feb 24, 2017 10:22 am
Contact:

Re: 20 Can spray bomb wall mount

Post by johnp »

Much thanks to the original poster! I cut three of these today (16ga steel), with zero modification to the original file. Very happy with the improvement to my shop!

Image
20180131_180047.jpg
20180131_180103.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

--------------------------------------------
Texas Metal Works
My Toys:
Vanquish
2 Star Member
2 Star Member
Posts: 77
Joined: Mon Jan 02, 2017 7:09 am

Re: 20 Can spray bomb wall mount

Post by Vanquish »

Very cool.
09 800r x
1 Star Member
1 Star Member
Posts: 23
Joined: Mon Jan 01, 2018 9:33 pm

Re: 20 Can spray bomb wall mount

Post by 09 800r x »

Very nice, thanks. I’ll be making few of these
tylerd
2.5 Star Member
2.5 Star Member
Posts: 123
Joined: Fri Jan 20, 2017 3:25 am

Re: 20 Can spray bomb wall mount

Post by tylerd »

Has anyone tried to cut the file by Old Iron with the relief cuts added? When I set the operation in sheetcam I get the following......!Outside Offset Layer, Open Paths were not offset. The file I am talking about is....... Paint Can holder 20.dxf

Thanks
Bulltear 4x8
PN200 Pendant
Linux Command CNC
Hypertherm PM 85
C&CNC Bladerunner Servo
DTHC IV Feather Touch
HyT-Connect DCP-01
Sheetcam Inkscape QCAD
krymis
2 Star Member
2 Star Member
Posts: 63
Joined: Tue Aug 22, 2017 9:59 am

Re: 20 Can spray bomb wall mount

Post by krymis »

i did in designedge and it cut fine.
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: 20 Can spray bomb wall mount

Post by little blue choo »

No problem, Cut it. No offset for straight lines. It will cut the lines where they are drawn.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Searchman
3 Star Member
3 Star Member
Posts: 418
Joined: Tue Aug 18, 2015 11:30 am

Re: 20 Can spray bomb wall mount

Post by Searchman »

Thanks for the great share
tylerd
2.5 Star Member
2.5 Star Member
Posts: 123
Joined: Fri Jan 20, 2017 3:25 am

Re: 20 Can spray bomb wall mount

Post by tylerd »

Awesome, thanks for the reply!
Bulltear 4x8
PN200 Pendant
Linux Command CNC
Hypertherm PM 85
C&CNC Bladerunner Servo
DTHC IV Feather Touch
HyT-Connect DCP-01
Sheetcam Inkscape QCAD
Rex
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 316
Joined: Sat Oct 08, 2016 12:26 pm

Re: 20 Can spray bomb wall mount

Post by Rex »

Cutout Great
Thanks
plasmacam 4x8 with DHC2 with Design Edge
Hypertherm 65
RPM
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Sat Jul 25, 2009 10:33 pm

Re: 20 Can spray bomb wall mount

Post by RPM »

Thanks guys that will come in very handy.
Jeepn2
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 203
Joined: Sat Apr 05, 2014 11:16 am
Location: SE Oklahoma

Re: 20 Can spray bomb wall mount

Post by Jeepn2 »

Thanks, cut out of aluminum and turned out nice .
Precision Plasma Patriot 4X8, water table, Price THC, UC 400ETH, Floating head
Hypertherm 45XP - Machine torch
UCCNC, Sheetcam, Inkscape/Corel X5
Paint Chip
2.5 Star Member
2.5 Star Member
Posts: 108
Joined: Tue Oct 30, 2012 7:43 pm

Re: 20 Can spray bomb wall mount

Post by Paint Chip »

The 20 can holder is a great idea and thanks to the OP for the share. Hope he doesn't mind, but I modified the drawing a little - I stretched it a bit and added 2 more folds - which allows the top row to stand proud of the front row so you can see the paint can colors in the back row (for us vertically challenged folks ;) )- see the pic.

Image
20CanHolder.dxf
20CanHolder.svg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

PPLLC 4X8 table w 620 ox steppers on 5 axes
Bladerunner CandCNC w/DTHC II
Hypertherm PM85
dholt87
2.5 Star Member
2.5 Star Member
Posts: 101
Joined: Thu Apr 16, 2015 9:04 am

Re: 20 Can spray bomb wall mount

Post by dholt87 »

Thanks for the files
User avatar
edclayton1
2.5 Star Member
2.5 Star Member
Posts: 123
Joined: Thu Sep 25, 2014 10:57 pm
Location: Rathdrum, Idaho

Re: 20 Can spray bomb wall mount

Post by edclayton1 »

Thank you, this will come in very handy. Great idea.
Home Built 4 * 8 table
Bladerunner
Miller Syncrowave 250 TIG welder
Miller 211 Wirefeed Welder
Bridgeport Mill
Jet 13 * 40 Lathe
Hypertherm Powermax 65
80 gal 2 stage 175 PSI Emax air Compressor
ggeh
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 319
Joined: Thu Mar 31, 2016 2:51 pm

Re: 20 Can spray bomb wall mount

Post by ggeh »

Thanks for both files, I cut two of them for my garage so far, excellent organizer thanks for sharing.
Last edited by ggeh on Sun Jun 24, 2018 5:32 pm, edited 1 time in total.
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”