Skull mount/hanger

jasprive · Post by **jasprive** » Thu Dec 08, 2016 10:51 am

Does anyone by chance have a skull mount/hanger file they can post, have a buddy wanting me to do a European skull mount for just wanted some ideas

Thanks ahead of time really appreciated.

jasprive · Post by **jasprive** » Thu Dec 08, 2016 3:43 pm

I am working on 2 different ones now guess I will upload and share them when I am done to help others out.

Post by **sbest1** » Thu Dec 08, 2016 5:46 pm

I have this file but haven't cut it so check it out well. Not sure about assembling. Might help get you started.

Mount-Final.zip

steel 35 · Post by **steel 35** » Thu Dec 08, 2016 8:53 pm

Sweet File; The boot shaped toe & heal points drop in to 2, 1/4" x 1/2"long ? pieces of pipe welded to the right wall mount. drop the boot in and bolt the last piece to it. Very cool design and adjustable @ 1/2 hole's. I will be making lots of these. Thanks

jasprive · Post by **jasprive** » Fri Dec 09, 2016 10:58 am

Thanks

yeah that is a good idea thanks for sharing really appreciate it

zoeconner · Post by **zoeconner** » Fri Dec 09, 2016 12:28 pm

Anyone have a picture of this put together?

steel 35 · Post by **steel 35** » Sun Dec 11, 2016 10:28 pm

zoeconner wrote:Anyone have a picture of this put together?

Here is my test cut, I need to fix peck's, and the pipe spacing's.

zoeconner · Post by **zoeconner** » Mon Dec 12, 2016 8:44 am

Any reason for it to pivot? Why not just weld it together?

Post by **tnbndr** » Mon Dec 12, 2016 9:34 am

Any reason for it to pivot? Why not just weld it together?

Gives the option of better positioning after the mount is hung. Once welded you are locked in.

Rockenjvdesign · Post by **Rockenjvdesign** » Tue Dec 13, 2016 4:05 pm

Is this for a deer or elk?

donn92 · Post by **donn92** » Tue Dec 13, 2016 4:42 pm

i just built 6 of these trying to upload pics and it says too large can anyone help they fit the small skull i have perfect and the large one as well

Rockenjvdesign · Post by **Rockenjvdesign** » Tue Dec 13, 2016 5:41 pm

Need to go in and crop the pics to a smaller size

steel 35 · Post by **steel 35** » Tue Dec 13, 2016 11:40 pm

Rockenjvdesign wrote:Is this for a deer or elk?

No Elk

Rockenjvdesign · Post by **Rockenjvdesign** » Wed Dec 14, 2016 7:38 am

Anyone make one for elk?

Post by **kbenz** » Wed Dec 14, 2016 7:37 pm

how does the skull mount to it? I'm having visualization issues here...lol

Post by **Bobcat320** » Thu Dec 15, 2016 3:12 pm

I will play with it, can probably just scale it up and would work fine for an elk.
Pretty neat idea!

Post by **DezertBlingMoto** » Thu Dec 22, 2016 12:44 pm

can someone post the dxf I cant open it either. thanks in advance

Post by **plasmapros** » Thu Dec 22, 2016 12:48 pm

DezertBlingMoto wrote:can someone post the dxf I cant open it either. thanks in advance

Here's the dxf dbling

Mount-Final.dxf

Highvoltage · Post by **Highvoltage** » Thu Dec 29, 2016 11:26 pm

This is my version. Can make them any animal you want as a mounting plate.

Highvoltage · Post by **Highvoltage** » Thu Dec 29, 2016 11:41 pm

Here is a no welding version. Bend the tabs in on the wall mount with a crescent wrench, give the cactus looking skull mount a 90 degree twist and its ready to go. Gravity keeps the pivot locked i to the tabs well so the skull stays put. We have sold several of these and they work great.

Skull Holder.dxf

donn92 · Post by **donn92** » Fri Dec 30, 2016 6:17 am

Highvoltage wrote:This is my version. Can make them any animal you want as a mounting plate.

very nice any chance your willing to share the file

steel 35 · Post by **steel 35** » Fri Dec 30, 2016 11:42 am

[quote="Highvoltage"]Here is a no welding version.

Nice! & Thanks

Highvoltage · Post by **Highvoltage** » Fri Dec 30, 2016 10:31 pm

Elk head and broad head European mount files. I bought bullet hinges from the local steel supplier. The kind used on gates. The slots in the middle are welding guides for the hinges.

Broadhead.dxf

Elk .dxf

Limitless · Post by **Limitless** » Sat Dec 31, 2016 12:08 am

Thanks!!!

Post by **mlmtx01** » Mon Nov 27, 2017 12:33 pm

Highvoltage wrote:Elk head and broad head European mount files. I bought bullet hinges from the local steel supplier. The kind used on gates. The slots in the middle are welding guides for the hinges.

I can't get this file right. It keeps saying it needs to remove duplicate vectors in my sheetcam application. I can't find any duplicate vecotors in vcarve.

Skull mount/hanger

Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger

Re: Skull mount/hanger