Spanner wrench colection

[tjenus]

I thought I would share my wrench collection file, Most are for industrial, and boating, and general repair, Tablesaw , woodworking and other equipment, 90% are one-offs that I drew up, but there is some that have been downloaded from here and other places, "thanks if there yours" I have just put them in one file for the sharing, Thanks KH

Wrench DXF.rar

[Bobcat320]

This awesome - Thanks to you and everyone who contributed!

[Cz_apie]

Thanks for the sharing tjenus

[acourtjester]

That's some collection of wrenches thanks for posting

[seajinx]

Awesome tjenus, thanks for sharing.

[diyweldingplans]

thanks! used the 1.64" box end and edited to an open end wrench to tighten a plumbing union. It worked great!
I cut it out of 10ga but would recommend cutting from a 3/16" min or 1/4" preferred for long time use.

1.64 boxend and open.dxf

[techno]

Thanks for sharing.

[johnp]

Fantastic collection. Thanks much.

[Dishtech55]

Anyone have the Spanner Wrench in Dxf ? not sure what the Rar file is.. Thanks

[adbuch]

Anyone have the Spanner Wrench in Dxf ? not sure what the Rar file is.. Thanks

The original file folder is compressed. You can us a program such as BitZipper or WinZip (free trail available) to unzip the folder (de-compress).
The folder contains about 250 usable dxf files.

wrenches unzipped.jpg

Here is an example.

.5 saw blade wren.dxf

0.5 sawblade wrench.jpg

0.5 sawblade wrench 1.jpg

0.5 sawblade wrench 1 rev..dxf

[adbuch]

This is the one I use. I purchased it several years ago and use it quite often. There is a free trial version as well.
David

https://www.bitzipper.com/

BitZipper.jpg

WinZip has a free trial version also.
https://www.winzip.com/en/pages/downloa ... H7EALw_wcB

winzip.jpg

[Joe Jones]

Anyone have the Spanner Wrench in Dxf ? not sure what the Rar file is.. Thanks

A RAR file is just competition to ZIP. It is another method to do the same thing, to compress large files. WinRAR will open them and convert them back to regular files.

I like the challenge of making custom tools for specific jobs.


Joe


.

[Dishtech55]

Oh ok.. Learned something new... Ill try it.. I have some Backhoe cylinders to rebuild soon. and thinking, I might try to make some instead of paying $ for them. Thanks..

[plasmanewbie]

WOW, that is an extensive collection of wrenches! Gonna keep this one on file.

Not sure if it helps anyone but I have attached a Zip version of the OP's Rar file. No special software should be required for this one.

Just download the zip file with your Windows PC, right click on the downloaded zip file and from the menu that pops us click on Extract All and you will end with a duplicate but unzipped folder containing all the designs.

Wrench DXF.zip