FFA emblem/sign
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: FFA emblem/sign
These threads with all of the community chipping in are really great to read about. I hope I get good enough with CorelDraw to be able to help out someday too.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 1/2 Star Member
- Posts: 4
- Joined: Thu Nov 14, 2013 4:37 pm
Re: FFA emblem/sign
I have paid my fee and I can't download the FFA Emblem. Need it asap for a sign
-
- 3.5 Star Member
- Posts: 541
- Joined: Sun Feb 10, 2013 3:13 pm
- Location: mich.
Re: FFA emblem/sign
it takes a little while.
try again .
if it doesn't work pm the administrator he will help.
try again .
if it doesn't work pm the administrator he will help.
Arclight 4x4
hypertherm 65
corel x6
mach 3, sheet cam
miller 211 auto set
hypertherm 65
corel x6
mach 3, sheet cam
miller 211 auto set
-
- 1/2 Star Member
- Posts: 1
- Joined: Fri Sep 19, 2014 4:14 pm
Re: FFA emblem/sign
this is cool
-
- 1/2 Star Member
- Posts: 1
- Joined: Thu May 12, 2016 4:23 pm
Re: FFA emblem/sign
Does anyone have a FFA Emblem in DXF? Our daughter is having her banquet next Friday night and we need to cut her a sign out on the plasma table for the banquet.
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2647
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: FFA emblem/sign
Did you look at the first page of this thread???tsw fabrication wrote:Does anyone have a FFA Emblem in DXF? Our daughter is having her banquet next Friday night and we need to cut her a sign out on the plasma table for the banquet.
I think it's the third post that has the DXF.
Larry
-
- 1/2 Star Member
- Posts: 4
- Joined: Thu Mar 31, 2016 10:21 am
Re: FFA emblem/sign
We have a torchmate and I tried cutting the emlem today and it cut really nice until it got to the A in Agriculture and cut part and lifted up and was trying to cut 3 or 4 inches off the metal and then would cut part of the next item and did the same. I got a message about the gas input being low. Before I try again, has anyone else had this problem or have suggestions? I need it for banquet tomorrow if possible.
Thanks!
Thanks!
- WyoGreen
- 4 Star Member
- Posts: 897
- Joined: Tue Mar 04, 2014 8:36 pm
- Location: Cheyenne, Wyoming
Re: FFA emblem/sign
Irunyon,
There should be nothing in the cut file that would cause the problems you describe.
It sounds like you are having air pressure problems affecting your arc voltage. This is then causing your voltage to drop, so the torch is rising to try to get the voltage back up. You might try putting an air pressure gauge in a "tee" right at the air input of your plasma cutter and see if your air pressure stays above the minimum cut pressure for your plasma cutter while you are cutting.
Steve
There should be nothing in the cut file that would cause the problems you describe.
It sounds like you are having air pressure problems affecting your arc voltage. This is then causing your voltage to drop, so the torch is rising to try to get the voltage back up. You might try putting an air pressure gauge in a "tee" right at the air input of your plasma cutter and see if your air pressure stays above the minimum cut pressure for your plasma cutter while you are cutting.
Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
-
- 1/2 Star Member
- Posts: 3
- Joined: Tue Jan 17, 2017 8:54 am
Re: FFA emblem/sign
Does anyone have the new FFA emblem drawn up yet? They made some slight changes to it.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- tturanger
- 2 Star Member
- Posts: 82
- Joined: Fri Sep 28, 2012 1:13 pm
- Location: Texas
Re: FFA emblem/sign
I do, verify that you are an AST and I will send it to you. wcleveland@nsidtx.orgchoctawffa wrote:Does anyone have the new FFA emblem drawn up yet? They made some slight changes to it.
-
- 1/2 Star Member
- Posts: 2
- Joined: Wed Mar 08, 2017 11:18 am
Re: FFA emblem/sign
Would you mind posting the updated file on here so all could download it?tturanger wrote:I do, verify that you are an AST and I will send it to you. wcleveland@nsidtx.orgchoctawffa wrote:Does anyone have the new FFA emblem drawn up yet? They made some slight changes to it.
- tturanger
- 2 Star Member
- Posts: 82
- Joined: Fri Sep 28, 2012 1:13 pm
- Location: Texas
Re: FFA emblem/sign
Email mebchsffa wrote:Would you mind posting the updated file on here so all could download it?tturanger wrote:I do, verify that you are an AST and I will send it to you. wcleveland@nsidtx.orgchoctawffa wrote:Does anyone have the new FFA emblem drawn up yet? They made some slight changes to it.
-
- 1 Star Member
- Posts: 12
- Joined: Tue Apr 07, 2015 7:27 pm
Re: FFA emblem/sign
I would like an updated dxf file of the new FFA emblem if possible please. Our FFA kids want to give their retiring ffa advisor a parting gift. Let me know, thanks Randy
-
- 1 Star Member
- Posts: 17
- Joined: Sun Nov 03, 2013 11:16 pm
- Location: Linden California
Re: FFA emblem/sign
I tried emailing you and it came back as undeliverable. I am an Ag Mech teacher and FFA Advisor. Thank you to all that have contributed to this thread. We made one that was four feet tall a couple years ago for an award. I am making one tomorrow hopefully to give as a going away gift for my 11 year teaching partner that is leaving because of a medical condition. I am going to make a clock for her so it will just be the outline.tturanger wrote:I do, verify that you are an AST and I will send it to you. wcleveland@nsidtx.orgchoctawffa wrote:Does anyone have the new FFA emblem drawn up yet? They made some slight changes to it.
-
- 1/2 Star Member
- Posts: 1
- Joined: Fri Oct 13, 2017 6:20 pm
Re: FFA emblem/sign
Bumping this. Has anyone came up with a new FFA emblem? I also tried the email and it came back undeliverable.
- tturanger
- 2 Star Member
- Posts: 82
- Joined: Fri Sep 28, 2012 1:13 pm
- Location: Texas
Re: FFA emblem/sign
teachag wrote:I tried emailing you and it came back as undeliverable. I am an Ag Mech teacher and FFA Advisor. Thank you to all that have contributed to this thread. We made one that was four feet tall a couple years ago for an award. I am making one tomorrow hopefully to give as a going away gift for my 11 year teaching partner that is leaving because of a medical condition. I am going to make a clock for her so it will just be the outline.tturanger wrote:I do, verify that you are an AST and I will send it to you. wcleveland@nsidtx.orgchoctawffa wrote:Does anyone have the new FFA emblem drawn up yet? They made some slight changes to it.
I wrote the email wrong, it is wcleveland@nisdtx.org
- EastCoastOrnamental
- 1 Star Member
- Posts: 18
- Joined: Wed Sep 20, 2017 9:25 am
-
- 1/2 Star Member
- Posts: 6
- Joined: Thu Jul 22, 2010 6:59 pm
- Location: farmington, il
Re: FFA emblem/sign
teachag wrote:I tried emailing you and it came back as undeliverable. I am an Ag Mech teacher and FFA Advisor. Thank you to all that have contributed to this thread. We made one that was four feet tall a couple years ago for an award. I am making one tomorrow hopefully to give as a going away gift for my 11 year teaching partner that is leaving because of a medical condition. I am going to make a clock for her so it will just be the outline.tturanger wrote:I do, verify that you are an AST and I will send it to you. wcleveland@nsidtx.orgchoctawffa wrote:Does anyone have the new FFA emblem drawn up yet? They made some slight changes to it.
-
- 1/2 Star Member
- Posts: 6
- Joined: Thu Jul 22, 2010 6:59 pm
- Location: farmington, il
Re: FFA emblem/sign
How can I get a dxf file of the new FFA sign. I am a member on here. Thanks
-
- 2.5 Star Member
- Posts: 171
- Joined: Fri Nov 18, 2016 5:13 pm
Re: FFA emblem/sign
National FFA has a dxf on their website: https://www.ffa.org/ffa-brand-center/downloads. I think you have to be logged in to download it, but it's under 'FFA Emblem - Plasmacam' about halfway down the page.
Tim Eggleston
Banks High School
Banks, OR
Arc Pro 4800
PowerMax 45XP
Mach 3, SheetCam
Inkscape, Rhino 3D
Banks High School
Banks, OR
Arc Pro 4800
PowerMax 45XP
Mach 3, SheetCam
Inkscape, Rhino 3D