Skidsteer quick-attach plate

[cutterguy]

I looking for a dxf file for a skidsteer quick-attach plate. Does anyone have one to share?

Doug

[Midwesternhunter1985]

This should work for you. This is the one I drew up for work

Quick attach (final).dxf

[Capstone]

Thanks for the share.

[otisa2007]

its in plasma cam format but heres one i drew up to move plate the triangle brackets go on the bottom and designed for 2" square tubing this is what i use for forks to move plate around with my tractor mabey someone can convert it to dxf

quick attach new plasma spider.pcm

[Shane Warnick]

Here is the dxf.

Shane

Bobcat Qick Attach Plate Otisa2007.dxf

[david47julie]

here are some bobcat mounts that I cut for a friend sorry i don't have a picture of one finished I always forget to take pictures of finished projects

bobcat mount.dxf

bobcat mount.pcm

[Stout]

its in plasma cam format but heres one i drew up to move plate the triangle brackets go on the bottom and designed for 2" square tubing this is what i use for forks to move plate around with my tractor mabey someone can convert it to dxf

quick attach new plasma spider.pcm

The side pieces have different angles. Which is top? I don't understand what the triangles are supposed to do. And what are the pieces that look like a house?

[PlasmaDon]

I Noticed a few threads dealing with the dimensions, here is the actual spec., with tolerances.
https://wiki.opensourceecology.org/imag ... _j2513.pdf
I have noted that in making various attachments, the spec does not indicate how far off the ground the device is.
So I measure the skid steer with the arms all the way down to get a reference dimension from the plate to the ground.
All skid loaders using this standard are not the same dimension off the ground.

[caretech]

Thanks for posting this, PlasmaDon. I've prowled around looking for official specs, found some behind a paywall with a price I refused to pay, etc. This is great!