Pentagon Fire Pit
- d2day
- 2.5 Star Member
- Posts: 114
- Joined: Wed Sep 17, 2014 7:59 pm
Pentagon Fire Pit
Time to give back for the help and files that have been shared here by the many great people here.
This is a Pentagon fire pit and stand that I designed for a customer and decided to share. The file is sized for a 4'x4' piece of metal
but can be sized up to make the pit larger. As designed the pit fits inside the stand and helps to keep the hottest metal away
from contact. It can be removed from the stand to help with cleaning,
I am posting a dxf and svg file.
Both files were drawn in Corel version 12 and contain some duplicate lines but Sheetcam deletes those lines
and removes those problems when cutting. The pipe used in the stand is 1/2 inch emt electrical conduit and was bent to shape with a
hand conduit bender. The triangles are spot welded to make the top, care should be taken to get the pieces on the correct angle to
insure the top fits properly. I missed the setup slightly, it was my first attempt.... The flame images are some that I purchased in
2003 for my use, not sure of copyright issues if you use them, use at your own risk or change the designs to suit your need. Please note
that I have added a handle (not shown) to the final version of the top. There is an extra piece in the svg drawing to cover the top of
the pipe supports.
Hope some of you can use the design...and make money
This is a Pentagon fire pit and stand that I designed for a customer and decided to share. The file is sized for a 4'x4' piece of metal
but can be sized up to make the pit larger. As designed the pit fits inside the stand and helps to keep the hottest metal away
from contact. It can be removed from the stand to help with cleaning,
I am posting a dxf and svg file.
Both files were drawn in Corel version 12 and contain some duplicate lines but Sheetcam deletes those lines
and removes those problems when cutting. The pipe used in the stand is 1/2 inch emt electrical conduit and was bent to shape with a
hand conduit bender. The triangles are spot welded to make the top, care should be taken to get the pieces on the correct angle to
insure the top fits properly. I missed the setup slightly, it was my first attempt.... The flame images are some that I purchased in
2003 for my use, not sure of copyright issues if you use them, use at your own risk or change the designs to suit your need. Please note
that I have added a handle (not shown) to the final version of the top. There is an extra piece in the svg drawing to cover the top of
the pipe supports.
Hope some of you can use the design...and make money
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Mach 3
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC
- Craig
- 3.5 Star Member
- Posts: 628
- Joined: Mon Dec 24, 2012 3:43 pm
- otisa2007
- 3 Star Elite Contributing Member
- Posts: 458
- Joined: Thu Apr 04, 2013 6:59 pm
- Location: mt pleasant texas
- Contact:
Re: Pentagon Firepit
nice thanks for the share
-
- 3 Star Member
- Posts: 311
- Joined: Fri Oct 31, 2014 8:50 am
- Location: East Tennessee
Re: Pentagon Firepit
Nice Pit d2day, thanks for sharing. I'll be cutting one soon. Will post when completed. Thanks again.
- steel 35
- 3.5 Star Member
- Posts: 634
- Joined: Sun Jan 11, 2015 11:12 am
- Location: N of Cali.
Re: Pentagon Firepit
Looks really good thanks for another great Idea.
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Pentagon Firepit
Cool looking pit. Can't have enough pits. Thanks for sharing D2Day.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
-
- 2.5 Star Member
- Posts: 199
- Joined: Mon Dec 08, 2014 4:33 pm
- Location: Gentry, AR
- Contact:
Re: Pentagon Fire Pit
Thanks for sharing...
5x10 Dynatorch High Definition plasma table. Cuttingshop drawing program. Sigmanest nesting program. Custom fabrication and powder coating.
Whatsoever thy hand findeth to do, do it with thy might Ecclesiastes 9:10
Whatsoever thy hand findeth to do, do it with thy might Ecclesiastes 9:10
- someguy
- 2 Star Member
- Posts: 84
- Joined: Mon Jul 30, 2012 5:38 pm
- Location: San Antonio, TX
Re: Pentagon Fire Pit
Nice work, thanks for sharing.
- Scratch
- 3.5 Star Elite Contributing Member
- Posts: 806
- Joined: Tue Sep 01, 2009 9:07 pm
- Location: Hudson,WI
- Contact:
Re: Pentagon Fire Pit
Cool design, thanks for sharing!
Will you be patenting the idea of putting artistic designs in a pentagon fire pit shape?
Sorry... Couldn't help myself.
Will you be patenting the idea of putting artistic designs in a pentagon fire pit shape?
Sorry... Couldn't help myself.
I think I'm the oldest 10 year old boy on the forum...
-
- 3 Star Member
- Posts: 285
- Joined: Sun Dec 08, 2013 9:05 pm
Re: Pentagon Fire Pit
thanks for sharing
PlasmaRoute "DO NOT BUY there Plasma table from this company NO Support"
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
-
- 2 Star Member
- Posts: 72
- Joined: Wed Feb 05, 2014 5:17 pm
- Location: Dallas Texas
Re: Pentagon Fire Pit
Awesome design
Thanks for sharing
Thanks for sharing
-
- 2 Star Member
- Posts: 73
- Joined: Fri Jun 01, 2012 9:50 pm
- Location: Brasstown n.c.
Re: Pentagon Fire Pit
NICE DESIGN THANKS FOR SHARING
- d2day
- 2.5 Star Member
- Posts: 114
- Joined: Wed Sep 17, 2014 7:59 pm
Re: Pentagon Fire Pit
Cool design, thanks for sharing!
Seriously though the artwork was purchased a long time ago so use it at your own risk. There maybe someone who will fuss, don't remember where I bought it. I think I purchased it when I bought my cnc router back in 2002 or 2003.
No patents applied for, just make as many as you can sell or give away...Hee, Hee.Will you be patenting the idea of putting artistic designs in a pentagon fire pit shape?
Sorry... Couldn't help myself.
Scratch...
Seriously though the artwork was purchased a long time ago so use it at your own risk. There maybe someone who will fuss, don't remember where I bought it. I think I purchased it when I bought my cnc router back in 2002 or 2003.
Mach 3
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC
-
- 1.5 Star Member
- Posts: 28
- Joined: Mon Aug 08, 2016 9:17 am
Re: Pentagon Fire Pit
Nice Design keep up the good work
- Poh
- 2.5 Star Elite Contributing Member
- Posts: 111
- Joined: Thu Jun 20, 2013 5:21 pm
- Location: Plumas County, Ca.
Re: Pentagon Fire Pit
Thanks for sharing, very clever!
Poh, Stainless is Forever!!!
Torchmate 5'x10' water table,Torchmate 8 CAD
Hypertherm HSD 130
Plate Marker ,Tube Cutter, and Oxy-Acetylene
Miller Dynasty 350
Miller 350 p
Torchmate 5'x10' water table,Torchmate 8 CAD
Hypertherm HSD 130
Plate Marker ,Tube Cutter, and Oxy-Acetylene
Miller Dynasty 350
Miller 350 p
- Zippo
- 4.5 Star Elite Contributing Member
- Posts: 1709
- Joined: Fri Mar 04, 2011 12:49 pm
- Location: Minnesota Based
Re: Pentagon Fire Pit
Looks good, Thanks for sharing.
-
- 2.5 Star Member
- Posts: 109
- Joined: Thu Jan 29, 2015 12:52 pm
Re: Pentagon Fire Pit
Goregous Work d2day!
Brew Worx.
Blue Frog Metal Works
Chicagoland
Arclight 4800
Hypertherm 45
4 inch tube cutter
Mach 3, SheetCAM, Solid Edge 2D, Solid Works 3D, CREO, Inkscape, and a few cobb webs
Blue Frog Metal Works
Chicagoland
Arclight 4800
Hypertherm 45
4 inch tube cutter
Mach 3, SheetCAM, Solid Edge 2D, Solid Works 3D, CREO, Inkscape, and a few cobb webs
-
- 3 Star Elite Contributing Member
- Posts: 287
- Joined: Wed Aug 27, 2014 12:03 pm
- Location: Shiner
Re: Pentagon Fire Pit
NICE PIT THANKS FOR THE SHARE.
Samson 5x10
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
-
- 2.5 Star Member
- Posts: 112
- Joined: Wed Oct 07, 2015 4:33 pm
Re: Pentagon Fire Pit
Hanemt tried a fire pit yet, but getting ideas, thank you!
-
- 1.5 Star Member
- Posts: 36
- Joined: Fri Dec 22, 2017 9:50 pm
Re: Pentagon Fire Pit
Good Job Thanks
-
- 2 Star Member
- Posts: 86
- Joined: Fri Oct 20, 2017 11:49 am
- Location: Just south of Tupelo
-
- 1 Star Member
- Posts: 21
- Joined: Sat Jul 14, 2018 7:43 pm
Re: Pentagon Fire Pit
Thank you, this will be great to cut for this summer!