Geo Fire pit

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
deyhard
2 Star Member
2 Star Member
Posts: 73
Joined: Fri Jun 01, 2012 9:50 pm
Location: Brasstown n.c.

Re: Geo Fire pit

Post by deyhard »

Abcmfg123 wrote:Can i please get this file?
Page one first post
deyhard
2 Star Member
2 Star Member
Posts: 73
Joined: Fri Jun 01, 2012 9:50 pm
Location: Brasstown n.c.

Re: Geo Fire pit

Post by deyhard »

ScotchandIron wrote:Couple more shots
I have a customer wanting a floral fire pit similar to this where'd you get the filesfor this our could you share it
User avatar
Peechy
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 337
Joined: Tue Nov 11, 2014 9:12 pm
Contact:

Re: Geo Fire pit

Post by Peechy »

Araco92 wrote:
Peechy wrote:This is the other file I have hope someone can use it 8-)
octagon fire pit.dxf
How are you poscised?


Yes and there is also a 3d soccer ball file on makecnc.com way better , I believe the file is worth $3 .. good luck and have fun! 8-)
8-)
User avatar
johnp
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Fri Feb 24, 2017 10:22 am
Contact:

Re: Geo Fire pit

Post by johnp »

Seems like it would be very important to get the angles correct when welding this together? Any tips on doing that? Or has anyone made a little jig to assist in the process of assembly?
--------------------------------------------
Texas Metal Works
My Toys:
dana
1.5 Star Member
1.5 Star Member
Posts: 25
Joined: Mon Oct 29, 2012 1:16 pm

Re: Geo Fire pit

Post by dana »

wow !! thanks
TTS
2 Star Member
2 Star Member
Posts: 54
Joined: Sat Aug 13, 2016 9:50 am

Re: Geo Fire pit

Post by TTS »

johnp wrote:Seems like it would be very important to get the angles correct when welding this together? Any tips on doing that? Or has anyone made a little jig to assist in the process of assembly?
No jig necessary. Just line up the pieces like you are putting a puzzle together.
PlasmaGranny
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Tue Jun 14, 2016 6:38 pm

Re: Geo Fire pit

Post by PlasmaGranny »

I am super new to all this bending and angles. How are y'all bending the 1/4 on these. Even the lighter metal? I'm going to cut my first one out of 14g just to make sure all it good with my designs in it. Then just use it as a table. Put a top on it :) Every panel is a different design, that way I can figure out how I want my pattern to run.

Thanks in Advance.
Yellowdodge2005
1 Star Member
1 Star Member
Posts: 20
Joined: Thu May 11, 2017 10:38 am

Re: Geo Fire pit

Post by Yellowdodge2005 »

Thankyou and awsome
BlueMagic
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Sun Jun 04, 2017 2:03 am

Re: Geo Fire pit

Post by BlueMagic »

This is awesome ... I'm all new to this stuff and wanna do one with a star wars theme.
techno
2 Star Member
2 Star Member
Posts: 73
Joined: Sun Dec 17, 2017 2:38 pm

Re: Geo Fire pit

Post by techno »

great work, thanks for sharing.
techno
2 Star Member
2 Star Member
Posts: 73
Joined: Sun Dec 17, 2017 2:38 pm

Re: Geo Fire pit

Post by techno »

great work, thanks for sharing.
Shellylucas
1 Star Member
1 Star Member
Posts: 10
Joined: Wed Sep 28, 2016 5:59 am

Re: Geo Fire pit

Post by Shellylucas »

thank you for sharing!
deyhard
2 Star Member
2 Star Member
Posts: 73
Joined: Fri Jun 01, 2012 9:50 pm
Location: Brasstown n.c.

Re: Geo Fire pit

Post by deyhard »

PlasmaGranny wrote:I am super new to all this bending and angles. How are y'all bending the 1/4 on these. Even the lighter metal? I'm going to cut my first one out of 14g just to make sure all it good with my designs in it. Then just use it as a table. Put a top on it :) Every panel is a different design, that way I can figure out how I want my pattern to run.

Thanks in Advance.
I dont bend each panel is cut separate then weld
User avatar
hdfaster
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 501
Joined: Thu Jan 07, 2010 11:38 pm

Re: Geo Fire pit

Post by hdfaster »

FIRE%20BALL%20(6).JPG
DSCN7464%20(0).JPG
This is what I came up with in 2015 when the soccer ball scandal began.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
hdfaster
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 501
Joined: Thu Jan 07, 2010 11:38 pm

Re: Geo Fire pit

Post by hdfaster »

All pieces are cut separately then welded together. I also put a 6" LP fire pit burner in the bottom.
Probird
1 Star Member
1 Star Member
Posts: 14
Joined: Sun Nov 26, 2017 10:03 am

Re: Geo Fire pit

Post by Probird »

Sorry, wrong post....
Sorry to bring up an old thread, but, Is the file in post 1 for half of the unit?
If so, when making 2 of them, will they fit together when they are cut to make a ball?

Thanks for any input.
4x8 Premier Plasma Table
Hypertherm 45xp
Inkscape
Viacad
Sheetcam
Mach3
Proma 150 THC
gotee
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Tue Jan 31, 2012 9:42 pm
Location: Lakeland

Re: Geo Fire pit

Post by gotee »

I am not an attorney but anyone worried about copyright issues needs to actually read the Copyright information. Its very informative, You cant copyright a shape of common or familiar symbols.(Fleur De Lys. star ying yang heart a diamong etc) This guy Louis' registration is a joke. It cant cover anything broad. Actually if anyone ever built one before him in the past(which has been done, the shape that is) he(Louis) could be in jeopardy of stealing their intellectual property. But it is a common shape that has been around forever and would not fall under an Architectural design. You can copyright all 2d patterns. The only thing he can copyright is specific artwork inserted if it is his intellectual property not the process.

This link covers what is not covered by copyrights

https://www.copyright.gov/circs/circ33.pdf
https://www.copyright.gov/circs/circ01.pdf
Lmpsr70357
2 Star Member
2 Star Member
Posts: 56
Joined: Tue May 17, 2016 1:21 pm

Re: Geo Fire pit

Post by Lmpsr70357 »

[quote="gotee"]I am not an attorney but anyone worried about copyright issues needs to actually read the Copyright information. Its very informative, You cant copyright a shape of common or familiar symbols.(Fleur De Lys. star ying yang heart a diamong etc) This guy Louis' registration is a joke. It cant cover anything broad. Actually if anyone ever built one before him in the past(which has been done, the shape that is) he(Louis) could be in jeopardy of stealing their intellectual property. But it is a common shape that has been around forever and would not fall under an Architectural design. You can copyright all 2d patterns. The only thing he can copyright is specific artwork inserted if it is his intellectual property not the process.

This link covers what is not covered by copyrights

https://www.copyright.gov/circs/circ33.pdf
https://www.copyright.gov/circs/circ01.pdf[/quote]


lol!
deyhard
2 Star Member
2 Star Member
Posts: 73
Joined: Fri Jun 01, 2012 9:50 pm
Location: Brasstown n.c.

Re: Geo Fire pit

Post by deyhard »

Probird wrote:Sorry, wrong post....
Sorry to bring up an old thread, but, Is the file in post 1 for half of the unit?
If so, when making 2 of them, will they fit together when they are cut to make a ball?

Thanks for any input.
full ball you'll need to cut some half'sout of the hexagons
deyhard
2 Star Member
2 Star Member
Posts: 73
Joined: Fri Jun 01, 2012 9:50 pm
Location: Brasstown n.c.

Re: Geo Fire pit

Post by deyhard »

Lmpsr70357 wrote:
gotee wrote:I am not an attorney but anyone worried about copyright issues needs to actually read the Copyright information. Its very informative, You cant copyright a shape of common or familiar symbols.(Fleur De Lys. star ying yang heart a diamong etc) This guy Louis' registration is a joke. It cant cover anything broad. Actually if anyone ever built one before him in the past(which has been done, the shape that is) he(Louis) could be in jeopardy of stealing their intellectual property. But it is a common shape that has been around forever and would not fall under an Architectural design. You can copyright all 2d patterns. The only thing he can copyright is specific artwork inserted if it is his intellectual property not the process.

This link covers what is not covered by copyrights

https://www.copyright.gov/circs/circ33.pdf
https://www.copyright.gov/circs/circ01.pdf

lol!
Still starting crap a Louis surprised your still aloud in this group after all those you ripped off
Fastyankee
1 Star Member
1 Star Member
Posts: 13
Joined: Sat May 20, 2017 11:30 am
Location: Fernandina Florida
Contact:

Re: Geo Fire pit

Post by Fastyankee »

That's awesome work.
waynesworld69a
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Tue Jul 16, 2019 4:01 am

Re: Geo Fire pit

Post by waynesworld69a »

this is awesome but can you share the dxfs for the moose and the two trees you have in the big one and the base please
User avatar
Peechy
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 337
Joined: Tue Nov 11, 2014 9:12 pm
Contact:

Re: Geo Fire pit

Post by Peechy »

deyhard wrote: Sat Aug 06, 2016 11:33 am O WELL GOT MY SELF KICK OUT OF THE LOSER SPIN LIZARD GROUP . I GUESS IT'S OK FOR HIM TO STEAL OTHERS WORK AND SELL IT BUT i CAN'T SHARE MY OWN ONCE HE CLAIMS IT.
LOL :HaHa
8-)
deyhard
2 Star Member
2 Star Member
Posts: 73
Joined: Fri Jun 01, 2012 9:50 pm
Location: Brasstown n.c.

Re: Geo Fire pit

Post by deyhard »

waynesworld69a wrote: Tue Jul 16, 2019 4:08 pm this is awesome but can you share the dxfs for the moose and the two trees you have in the big one and the base please
sorry those where purchased files
waynesworld69a
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Tue Jul 16, 2019 4:01 am

Re: Geo Fire pit

Post by waynesworld69a »

Thats cool can you please tell me where you bought them from i would like to buy them...iv been hunting for some the same but carnt find any
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”