Underwater fish scene
-
- 1/2 Star Member
- Posts: 7
- Joined: Mon Apr 27, 2015 10:45 pm
Underwater fish scene
first share
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Underwater fish scene
The water is pretty merky, I can't see a thing.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 2 Star Member
- Posts: 72
- Joined: Thu Apr 21, 2016 5:37 pm
Re: Underwater fish scene
Arclight 4x4
Hypertherm Pm45
Lincoln 256 Mig
Precision Tig 275
Baileigh 50 Ton Press
Quincy 2 stage 5Hp compressor
Hypertherm Pm45
Lincoln 256 Mig
Precision Tig 275
Baileigh 50 Ton Press
Quincy 2 stage 5Hp compressor
-
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: Underwater fish scene
You're not looking hard enough Rick, it's a polar bear in a snow storm in antartica chasing an albino salmon
Thanks for trying and have another go, make sure your file is below 1mb to upload.
Murray
Thanks for trying and have another go, make sure your file is below 1mb to upload.
Murray
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Underwater fish scene
I must be snow blind!muzza wrote:You're not looking hard enough Rick, it's a polar bear in a snow storm in antartica chasing an albino salmon
Thanks for trying and have another go, make sure your file is below 1mb to upload.
Murray
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 3 Star Member
- Posts: 376
- Joined: Thu May 28, 2015 8:02 am
- Location: Merritt island fl.
Re: Underwater fish scene
guys you know he lives next to the Mississippi river
-
- 2 Star Member
- Posts: 73
- Joined: Fri Jun 01, 2012 9:50 pm
- Location: Brasstown n.c.
Re: Underwater fish scene
I know the sun not out yet
- rons
- 2.5 Star Member
- Posts: 179
- Joined: Thu Jul 23, 2015 2:26 pm
- Location: Charlotte, NC
Re: Underwater fish scene
Try coffee first
4x8 Home made with PPL Gantry
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
-
- 1/2 Star Member
- Posts: 7
- Joined: Mon Apr 27, 2015 10:45 pm
Re: Underwater fish scene
found the picture of the fish on this site added the back ground
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- otisa2007
- 3 Star Elite Contributing Member
- Posts: 458
- Joined: Thu Apr 04, 2013 6:59 pm
- Location: mt pleasant texas
- Contact:
Re: Underwater fish scene
very nice thanks for the share
-
- 1.5 Star Member
- Posts: 43
- Joined: Sat Mar 16, 2013 12:17 am
Re: Underwater fish scene
that looks great thanks for the share
-
- 2.5 Star Elite Contributing Member
- Posts: 196
- Joined: Tue Oct 15, 2013 8:39 pm
Re: Underwater fish scene
very nice thank you
-
- 2.5 Star Member
- Posts: 119
- Joined: Sun Feb 14, 2016 10:08 am
Re: Underwater fish scene
Very Nice . Thanks
Hypertherm Powermax 85
Candcnc Electronics
Mach3
SheetcamTNG
Aspire
Candcnc Electronics
Mach3
SheetcamTNG
Aspire
-
- 3.5 Star Member
- Posts: 681
- Joined: Wed Nov 26, 2014 5:12 pm
Re: Underwater fish scene
Thanks for sharing
-
- 2.5 Star Elite Contributing Member
- Posts: 233
- Joined: Wed Feb 02, 2011 5:15 pm
- Location: Santa Anna Texas
- Contact:
Re: Underwater fish scene
Does anyone else get all of the little circles on the lines when opening this? Beautiful work.
http://www.PenningtonFab.com
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7809
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Underwater fish scene
looks fine for me opened in Inkscape fine and SheetCam did show one line that was not in the other view.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- Poh
- 2.5 Star Elite Contributing Member
- Posts: 111
- Joined: Thu Jun 20, 2013 5:21 pm
- Location: Plumas County, Ca.
Re: Underwater fish scene
I do with my torchmate, they are deletable though.. I see you are in Susanville, I'm just over the hill in Quincyaicomp wrote:Does anyone else get all of the little circles on the lines when opening this? Beautiful work.
Poh, Stainless is Forever!!!
Torchmate 5'x10' water table,Torchmate 8 CAD
Hypertherm HSD 130
Plate Marker ,Tube Cutter, and Oxy-Acetylene
Miller Dynasty 350
Miller 350 p
Torchmate 5'x10' water table,Torchmate 8 CAD
Hypertherm HSD 130
Plate Marker ,Tube Cutter, and Oxy-Acetylene
Miller Dynasty 350
Miller 350 p
-
- 2 Star Member
- Posts: 73
- Joined: Fri Jun 01, 2012 9:50 pm
- Location: Brasstown n.c.
Re: Underwater fish scene
Thank you for sharing
-
- 2.5 Star Elite Contributing Member
- Posts: 233
- Joined: Wed Feb 02, 2011 5:15 pm
- Location: Santa Anna Texas
- Contact:
Re: Underwater fish scene
Here is the Scene with all of the little circles I got in TM Cad edited out.
Mike
Mike
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
http://www.PenningtonFab.com
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
-
- 1 Star Member
- Posts: 16
- Joined: Sat Mar 04, 2017 1:18 pm
Re: Underwater fish scene
What/how did you do that finish?
-
- 3 Star Member
- Posts: 296
- Joined: Wed Apr 01, 2015 10:30 pm
- Location: Watkins, Iowa
Re: Underwater fish scene
VERY NICE!!! And thank you aicomp for the dxf without the circles. I got the same thing on my TM Cad.
-
- 1/2 Star Member
- Posts: 7
- Joined: Mon Apr 27, 2015 10:45 pm
Re: Underwater fish scene
I used Steel FX patina. Copper,flame,bronze color.
-
- 1/2 Star Member
- Posts: 6
- Joined: Fri Jan 27, 2017 10:21 am
- Location: Arkansas
Re: Underwater fish scene
Anyone have one like this with a bass instead?
Thanks,
Thanks,
- Gamelord
- 4.5 Star Member
- Posts: 1637
- Joined: Wed Aug 29, 2012 5:17 pm
- Contact:
Re: Underwater fish scene
Here you go, kinda weird but whatever floats your bass.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: Underwater fish scene
HA! Well done!
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam